* Sea-Bird SBE19plus Data File: * FileName = C:\Documents and Settings\Emmanuel Boss\Desktop\Ken_5_5_23.hex * Software Version 1.57 * Temperature SN = 4547 * Conductivity SN = 4547 * System UpLoad Time = May 23 2011 12:02:17 * ds * SeacatPlus V 1.6 SERIAL NO. 4547 23 May 2011 12:01:38 * vbatt = 12.6, vlith = 5.3, ioper = 63.0 ma, ipump = 93.3 ma, * iext01 = 62.6 ma * iext23 = 38.0 ma * * status = not logging * number of scans to average = 1 * samples = 2150, free = 491297, casts = 6 * mode = profile, minimum cond freq = 0, pump delay = 30 sec * autorun = no, ignore magnetic switch = no * battery type = alkaline, battery cutoff = 7.3 volts * pressure sensor = strain gauge, range = 1450.0 * SBE 38 = no, Gas Tension Device = no * Ext Volt 0 = yes, Ext Volt 1 = yes, Ext Volt 2 = yes, Ext Volt 3 = no * echo commands = yes * output format = raw HEX * S> * * SeacatPlus V 1.6 SERIAL NO. 4547 23 May 2011 12:01:48 * temperature: 28-sep-05 * TA0 = 1.233548e-03 * TA1 = 2.530715e-04 * TA2 = 7.246278e-07 * TA3 = 1.128276e-07 * TOFFSET = 0.000000e+00 * conductivity: 28-sep-05 * G = -1.043676e+00 * H = 1.449014e-01 * I = -2.531377e-04 * J = 4.060736e-05 * CF0 = 1.000000e+03 * CPCOR = -9.570000e-08 * CTCOR = 3.250000e-06 * CSLOPE = 1.000000e+00 * pressure S/N = 3803, range = 1450 psia: 19-sep-05 * PA0 = -9.421468e-01 * PA1 = 4.425681e-03 * PA2 = -1.230853e-11 * PTCA0 = 5.210928e+05 * PTCA1 = -2.064206e+01 * PTCA2 = 4.935836e-01 * PTCB0 = 2.479575e+01 * PTCB1 = -8.500000e-04 * PTCB2 = 0.000000e+00 * PTEMPA0 = -6.093592e+01 * PTEMPA1 = 6.306502e+01 * PTEMPA2 = -1.618677e+00 * POFFSET = 0.000000e+00 * volt 0: offset = -4.677667e-02, slope = 1.249102e+00 * volt 1: offset = -4.656333e-02, slope = 1.250001e+00 * volt 2: offset = -4.660333e-02, slope = 1.248929e+00 * volt 3: offset = -4.677667e-02, slope = 1.249765e+00 * EXTFREQSF = 9.999954e-01 * dh * cast 6 23 May 2011 11:40:51 samples 1898 to 2150, avg = 1, stop = mag switch * S> # nquan = 9 # nvalues = 9 # units = specified # name 0 = depSM: Depth [salt water, m] # name 1 = tv290C: Temperature [ITS-90, deg C] # name 2 = sal00: Salinity [PSU] # name 3 = sigma-é00: Density [sigma-theta, Kg/m^3] # name 4 = v0: Voltage 0 # name 5 = v1: Voltage 1 # name 6 = v2: Voltage 2 # name 7 = nbin: number of scans per bin # name 8 = flag: flag # span 0 = 1.000, 5.000 # span 1 = 11.8581, 11.8656 # span 2 = 0.0227, 0.0231 # span 3 = -0.4674, -0.4666 # span 4 = 4.9627, 4.9640 # span 5 = 0.3280, 0.3342 # span 6 = 1.4247, 1.4317 # span 7 = 3, 17 # span 8 = 0.0000e+00, 0.0000e+00 # interval = meters: 0.5 # start_time = May 23 2011 11:40:51 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 4547, 28-Sep-05 # sensor 1 = Frequency 1 conductivity, 4547, 28-Sep-05, cpcor = -9.5700e-08 # sensor 2 = Pressure Number # sensor 3 = Extrnl Volt 0 userpoly 0, FLNTU-873, 10/8/2008 # sensor 4 = Extrnl Volt 1 userpoly 1, FLNTU-873 # sensor 5 = Extrnl Volt 2 WET Labs, WETStar fluorometer, WSCD-1082P, 7/14/2004 # datcnv_date = May 23 2011 12:20:43, 7.12 # datcnv_in = C:\Documents and Settings\Emmanuel Boss\Desktop\Ken\Ken_5_5_23.hex C:\Documents and Settings\Emmanuel Boss\Desktop\jims4547.con # datcnv_skipover = 127 # binavg_date = May 23 2011 12:21:42, 7.12 # binavg_in = C:\Documents and Settings\Emmanuel Boss\Desktop\Ken\Ken_5_5_23mod.cnv # binavg_bintype = meters # binavg_binsize = 0.5 # binavg_excl_bad_scans = yes # binavg_skipover = 0 # binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000 # file_type = ascii *END* 1.000 11.8581 0.0229 -0.4666 4.9634 0.3305 1.4317 17 0.0000e+00 1.500 11.8624 0.0227 -0.4673 4.9639 0.3292 1.4310 5 0.0000e+00 2.000 11.8647 0.0230 -0.4673 4.9632 0.3289 1.4315 3 0.0000e+00 2.500 11.8645 0.0228 -0.4674 4.9640 0.3326 1.4275 4 0.0000e+00 3.000 11.8654 0.0229 -0.4674 4.9631 0.3342 1.4277 6 0.0000e+00 3.500 11.8654 0.0231 -0.4673 4.9639 0.3304 1.4287 4 0.0000e+00 4.000 11.8656 0.0231 -0.4673 4.9627 0.3300 1.4247 4 0.0000e+00 4.500 11.8650 0.0231 -0.4672 4.9637 0.3284 1.4304 6 0.0000e+00 5.000 11.8651 0.0229 -0.4674 4.9629 0.3280 1.4307 15 0.0000e+00