08/09/2018 22:44:13 SeasaveAcq is starting up.
08/09/2018 22:44:14 ComInit failed for COM1
08/09/2018 22:44:14 Failed to initialize COM port or GPIB
08/09/2018 22:44:15 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
08/09/2018 22:44:17 SeasaveAcq is shutting down.

08/09/2018 22:46:54 SeasaveAcq is starting up.
08/09/2018 22:46:56 CRS232::Initialize(): port = COM4, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2018 22:47:12 CRS232::GetOneLine timed out.
08/09/2018 22:47:12 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/09/2018 22:48:13 COM4 has been reset.
08/09/2018 22:48:14 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/09/2018 22:48:15 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 22:48:15 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 22:48:15 SeasaveAcq is shutting down.

08/09/2018 22:49:35 SeasaveAcq is starting up.
08/09/2018 22:49:36 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2018 22:49:49 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/09/2018 23:04:17 COM4 has been reset.
08/09/2018 23:04:17 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/09/2018 23:04:18 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 23:04:19 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 23:04:19 SeasaveAcq is shutting down.

08/09/2018 23:08:48 SeasaveAcq is starting up.
08/09/2018 23:08:49 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2018 23:09:02 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/09/2018 23:13:58 COM4 has been reset.
08/09/2018 23:13:58 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/09/2018 23:13:59 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 23:13:59 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 23:13:59 SeasaveAcq is shutting down.

08/09/2018 23:18:37 SeasaveAcq is starting up.
08/09/2018 23:18:38 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2018 23:18:51 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/09/2018 23:19:19 Received command to start archiving data
08/09/2018 23:19:40 COM4 has been reset.
08/09/2018 23:19:40 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/09/2018 23:19:41 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 23:19:42 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 23:19:42 SeasaveAcq is shutting down.

08/09/2018 23:20:47 SeasaveAcq is starting up.
08/09/2018 23:20:49 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2018 23:21:01 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/09/2018 23:21:09 Received command to start archiving data
08/09/2018 23:22:32 COM4 has been reset.
08/09/2018 23:22:32 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/09/2018 23:22:33 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 23:22:34 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 23:22:34 SeasaveAcq is shutting down.

08/09/2018 23:23:30 SeasaveAcq is starting up.
08/09/2018 23:23:31 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/09/2018 23:23:44 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/09/2018 23:24:57 COM4 has been reset.
08/09/2018 23:24:58 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/09/2018 23:24:59 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 23:24:59 CModemPort::Cleanup() - COM3 has been reset.
08/09/2018 23:24:59 SeasaveAcq is shutting down.

08/12/2018 12:48:09 SeasaveAcq is starting up.
08/12/2018 12:48:10 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/12/2018 12:48:21 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/12/2018 13:03:32 COM4 has been reset.
08/12/2018 13:03:33 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/12/2018 13:03:33 CModemPort::Cleanup() - COM3 has been reset.
08/12/2018 13:03:33 CModemPort::Cleanup() - COM3 has been reset.
08/12/2018 13:03:33 SeasaveAcq is shutting down.

08/12/2018 13:06:52 SeasaveAcq is starting up.
08/12/2018 13:06:54 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/12/2018 13:07:05 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/12/2018 13:07:46 Received command to start archiving data
08/12/2018 13:08:52 COM4 has been reset.
08/12/2018 13:08:52 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/12/2018 13:08:53 CModemPort::Cleanup() - COM3 has been reset.
08/12/2018 13:08:54 CModemPort::Cleanup() - COM3 has been reset.
08/12/2018 13:08:54 SeasaveAcq is shutting down.

08/12/2018 13:10:41 SeasaveAcq is starting up.
08/12/2018 13:10:42 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/12/2018 13:10:53 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/12/2018 13:13:54 COM4 has been reset.
08/12/2018 13:13:54 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/12/2018 13:13:55 CModemPort::Cleanup() - COM3 has been reset.
08/12/2018 13:13:55 CModemPort::Cleanup() - COM3 has been reset.
08/12/2018 13:13:55 SeasaveAcq is shutting down.

08/12/2018 15:12:07 SeasaveAcq is starting up.
08/12/2018 15:12:08 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/12/2018 15:12:20 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/12/2018 15:13:33 COM4 has been reset.
08/12/2018 15:13:33 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/12/2018 15:13:34 CModemPort::Cleanup() - COM3 has been reset.
08/12/2018 15:13:35 CModemPort::Cleanup() - COM3 has been reset.
08/12/2018 15:13:35 SeasaveAcq is shutting down.

08/12/2018 15:18:23 SeasaveAcq is starting up.
08/12/2018 15:18:25 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/12/2018 15:18:37 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/12/2018 15:21:49 Received command to start archiving data
08/12/2018 15:33:05 COM4 has been reset.
08/12/2018 15:33:05 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/12/2018 15:33:06 CModemPort::Cleanup() - COM3 has been reset.
08/12/2018 15:33:06 CModemPort::Cleanup() - COM3 has been reset.
08/12/2018 15:33:06 SeasaveAcq is shutting down.

08/16/2018 12:34:22 SeasaveAcq is starting up.
08/16/2018 12:34:23 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/16/2018 12:34:34 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/16/2018 12:36:20 Received command to start archiving data
08/16/2018 12:48:22 COM4 has been reset.
08/16/2018 12:48:22 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/16/2018 12:48:22 CModemPort::Cleanup() - COM3 has been reset.
08/16/2018 12:48:22 CModemPort::Cleanup() - COM3 has been reset.
08/16/2018 12:48:22 SeasaveAcq is shutting down.

08/16/2018 15:06:08 SeasaveAcq is starting up.
08/16/2018 15:06:09 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/16/2018 15:06:20 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/16/2018 15:07:47 Received command to start archiving data
08/16/2018 15:20:36 COM4 has been reset.
08/16/2018 15:20:37 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/16/2018 15:20:37 CModemPort::Cleanup() - COM3 has been reset.
08/16/2018 15:20:37 CModemPort::Cleanup() - COM3 has been reset.
08/16/2018 15:20:37 SeasaveAcq is shutting down.

08/18/2018 19:35:06 SeasaveAcq is starting up.
08/18/2018 19:35:07 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/18/2018 19:35:18 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/18/2018 19:36:12 Received command to start archiving data
08/18/2018 19:46:32 COM4 has been reset.
08/18/2018 19:46:32 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/18/2018 19:46:33 CModemPort::Cleanup() - COM3 has been reset.
08/18/2018 19:46:33 CModemPort::Cleanup() - COM3 has been reset.
08/18/2018 19:46:33 SeasaveAcq is shutting down.

08/20/2018 20:06:18 SeasaveAcq is starting up.
08/20/2018 20:06:19 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/20/2018 20:06:30 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/20/2018 20:06:59 Received command to start archiving data
08/20/2018 20:21:45 COM4 has been reset.
08/20/2018 20:21:45 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/20/2018 20:21:46 CModemPort::Cleanup() - COM3 has been reset.
08/20/2018 20:21:47 CModemPort::Cleanup() - COM3 has been reset.
08/20/2018 20:21:47 SeasaveAcq is shutting down.

08/22/2018 14:04:07 SeasaveAcq is starting up.
08/22/2018 14:04:08 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 14:04:19 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 14:05:18 COM4 has been reset.
08/22/2018 14:05:18 CDataAcquisitionThread::Stop() took approximately    0.8 seconds. Exit code 00000000.
08/22/2018 14:05:19 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 14:05:20 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 14:05:20 SeasaveAcq is shutting down.

08/22/2018 14:05:40 SeasaveAcq is starting up.
08/22/2018 14:05:48 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 14:06:03 CRS232::GetOneLine timed out.
08/22/2018 14:06:09 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 14:06:39 CSBECarousel::InitializeWaterSampler() failed: No response to '#SR' command.
08/22/2018 14:06:39 Failed to initialize water sampler

08/22/2018 14:07:52 SeasaveAcq is starting up.
08/22/2018 14:08:00 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 14:08:14 CRS232::GetOneLine timed out.
08/22/2018 14:08:19 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 14:08:50 CSBECarousel::InitializeWaterSampler() failed: No response to '#SR' command.
08/22/2018 14:08:50 Failed to initialize water sampler

08/22/2018 14:09:45 SeasaveAcq is starting up.
08/22/2018 14:09:52 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 14:10:07 CRS232::GetOneLine timed out.
08/22/2018 14:10:12 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 14:10:43 CSBECarousel::InitializeWaterSampler() failed: No response to '#SR' command.
08/22/2018 14:10:43 Failed to initialize water sampler

08/22/2018 14:25:31 SeasaveAcq is starting up.
08/22/2018 14:25:32 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 14:25:45 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 14:26:05 COM4 has been reset.
08/22/2018 14:26:06 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/22/2018 14:26:07 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 14:26:07 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 14:26:07 SeasaveAcq is shutting down.

08/22/2018 14:31:22 SeasaveAcq is starting up.
08/22/2018 14:31:30 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 14:31:47 CRS232::GetOneLine timed out.
08/22/2018 14:31:54 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 14:32:24 CSBECarousel::InitializeWaterSampler() failed: No response to '#SR' command.
08/22/2018 14:32:24 Failed to initialize water sampler

08/22/2018 14:32:35 SeasaveAcq is starting up.
08/22/2018 14:32:43 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 14:32:59 CRS232::GetOneLine timed out.
08/22/2018 14:33:05 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 14:33:33 CSBECarousel::InitializeWaterSampler() failed: No response to '#SR' command.
08/22/2018 14:33:33 Failed to initialize water sampler
08/22/2018 14:33:38 COM4 has been reset.
08/22/2018 14:33:38 CDataAcquisitionThread::Stop() took approximately    4.7 seconds. Exit code 00000000.
08/22/2018 14:33:40 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 14:33:40 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 14:33:40 SeasaveAcq is shutting down.

08/22/2018 14:34:07 SeasaveAcq is starting up.
08/22/2018 14:34:16 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 14:34:32 CRS232::GetOneLine timed out.
08/22/2018 14:34:39 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 14:35:09 CSBECarousel::InitializeWaterSampler() failed: No response to '#SR' command.
08/22/2018 14:35:09 Failed to initialize water sampler
08/22/2018 14:35:10 COM4 has been reset.
08/22/2018 14:35:10 CDataAcquisitionThread::Stop() took approximately    0.9 seconds. Exit code 00000000.

08/22/2018 14:42:54 SeasaveAcq is starting up.
08/22/2018 14:42:55 ComInit failed for COM4
08/22/2018 14:42:55 Failed to initialize COM port or GPIB
08/22/2018 14:42:56 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
08/22/2018 14:42:57 SeasaveAcq is shutting down.

08/22/2018 14:59:33 SeasaveAcq is starting up.
08/22/2018 14:59:34 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 14:59:44 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 15:00:31 COM4 has been reset.
08/22/2018 15:00:32 CDataAcquisitionThread::Stop() took approximately    0.4 seconds. Exit code 00000000.
08/22/2018 15:00:32 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 15:00:33 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 15:00:33 SeasaveAcq is shutting down.

08/22/2018 15:05:23 SeasaveAcq is starting up.
08/22/2018 15:05:30 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 15:08:56 Warning: Closing the serial port may have failed.  It may be necessary to restart your computer.
08/22/2018 15:09:17 SeasaveAcq is shutting down.

08/22/2018 19:08:01 SeasaveAcq is starting up.
08/22/2018 19:08:02 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 19:08:13 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 19:08:49 Pump ON command received
08/22/2018 19:08:55 Pump Off command received
08/22/2018 19:09:01 COM4 has been reset.
08/22/2018 19:09:02 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/22/2018 19:09:02 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 19:09:03 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 19:09:03 SeasaveAcq is shutting down.

08/22/2018 20:25:08 SeasaveAcq is starting up.
08/22/2018 20:25:09 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/22/2018 20:25:20 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/22/2018 20:26:34 Received command to start archiving data
08/22/2018 20:32:37 COM4 has been reset.
08/22/2018 20:32:37 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/22/2018 20:32:38 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 20:32:39 CModemPort::Cleanup() - COM3 has been reset.
08/22/2018 20:32:39 SeasaveAcq is shutting down.

08/23/2018 14:12:00 SeasaveAcq is starting up.
08/23/2018 14:12:01 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/23/2018 14:12:12 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/23/2018 14:12:31 Received command to start archiving data
08/23/2018 14:33:16 COM4 has been reset.
08/23/2018 14:33:16 CDataAcquisitionThread::Stop() took approximately    0.8 seconds. Exit code 00000000.
08/23/2018 14:33:17 CModemPort::Cleanup() - COM3 has been reset.
08/23/2018 14:33:17 CModemPort::Cleanup() - COM3 has been reset.
08/23/2018 14:33:17 SeasaveAcq is shutting down.

08/23/2018 14:35:31 SeasaveAcq is starting up.
08/23/2018 14:35:38 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/23/2018 14:35:53 CRS232::GetOneLine timed out.
08/23/2018 14:35:59 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/23/2018 14:36:29 CSBECarousel::InitializeWaterSampler() failed: No response to '#SR' command.
08/23/2018 14:36:29 Failed to initialize water sampler

08/23/2018 15:21:23 SeasaveAcq is starting up.
08/23/2018 15:21:24 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/23/2018 15:21:35 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/23/2018 15:22:23 Received command to start archiving data
08/23/2018 15:22:50 COM4 has been reset.
08/23/2018 15:22:50 CDataAcquisitionThread::Stop() took approximately    0.5 seconds. Exit code 00000000.
08/23/2018 15:22:51 CModemPort::Cleanup() - COM3 has been reset.
08/23/2018 15:22:51 CModemPort::Cleanup() - COM3 has been reset.
08/23/2018 15:22:51 SeasaveAcq is shutting down.

08/24/2018 12:58:07 SeasaveAcq is starting up.
08/24/2018 12:58:08 CRS232::Initialize(): port = COM4, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
08/24/2018 12:58:19 CModemPort::InitializePort(): port = COM3, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
08/24/2018 13:00:07 Received command to start archiving data
08/24/2018 13:17:41 COM4 has been reset.
08/24/2018 13:17:41 CDataAcquisitionThread::Stop() took approximately    4.6 seconds. Exit code 00000000.