-----------------------------------------------------------------------------------------------------------------
UVP5 Pilot Module, version 7.21    2016/03/05
Pilot Starting Time : 20160331_0943
Project path : C:\uvp5_sn201_2016_naames_02
-----------------------------------------------------------------------------------------------------------------
=>  Checking COMPUTER Communication ports
Port list = COM3;COM4;
> COM PORT 4 being checked now for UVP5 status messages 
> COM4 OPEN
SURV : 03/31 08:43:47     176°   21°C   30.2V   -0.9m
> Message V092... UVP running now 
=> Testing if UVP5 responds to SBTY messages
> UVP RUN_OK or V092 messages received
-----------------------------------------------------------------------------------------------------------------
ACTION : TEST & MONITOR COM PORT
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
=> CLIC ON IMAGEJ TO ACTIVATE AND PRESS SPACE BAR to STOP
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : Synchronize UVP5 time with Computer time
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
=> TRYING TO STANDBY UVP5
sent: U013STBY_PRG!
UVP STBY_OK messages received
> Responding time = 0.2 sec.
=> SYNCHRONISING UVP5 TIME ON COMPUTER TIME
sent: U033SET_TIME_2016_03_31_09_44_10!
ret: U033SET_TIME_2016_03_31_09_44_10!
UVP RUN_OK messages received
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : SWITCH mode (advanced/user)
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : SEND ACQUISITION and INI files to UVP5
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
=> TRYING TO STANDBY UVP5
sent: U013STBY_PRG!
UVP STBY_OK messages received
> Responding time = 0.2 sec.
=>  CHECKING CAMERA STATUS
sent: S013WATCHDOG!
sent: S013WATCHDOG!
=>  STARTING CAMERA
sent: U017START_HD_CAM!
=> CHECKING if UVP5 CAMERA application is running
ret: U017START_HD_CAM!
=>  CHECKING CAMERA STATUS
sent: S013WATCHDOG!
ret: C042WATCHDOG_97976*097976*07*xxxxxxxxxxxx!
-----------------------------------------------------------------------------------------------------------------
FD free space = 97976 Mo (754 %)
HD free space = 97976 Mo (NaN %)
-----------------------------------------------------------------------------------------------------------------
CAMERA STARTED & RESPONDING
Source= C:\uvp5_sn201_2016_naames_02\config\\uvp5_settings\
Destination= //uvp5sn201/modfile
=>  CAMERA being stopped NOW
sent: S013EXITSOFT!
> CAMERA APPLICATION STOPPED
sent: U016STOP_HD_CAM!
CAMERA OFF
UVP RUN_OK messages received
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : START ACQUISITION (manual)
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
=>  Preparing UVP5 for Acquisition
sent: U013PRE_ACQU!
ret: C016PRE_ACQU_OK!
-----------------------------------------------------------------------------------------------------------------
ACTIVATE ImageJ (click in ImageJ window) and PRESS SPACE bar to STOP recording
-----------------------------------------------------------------------------------------------------------------
sent: U020STARTACQ_mixtfd!
> Acquisition started
ret: C016STARTACQ_OK!
-----------------------------------------------------------------------------------------------------------------
=> CLOSE graph image to change scales (do not save)
=> PLOT data are updated every second
=> PRESS SPACE bar to END
-----------------------------------------------------------------------------------------------------------------
Start time 20160331_094831  Index 0
Stop time 20160331_094844  Index 10
=>  UVP5 camera being stopped
ret: U013STOP_ACQ!
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : READ / PROGRAM sequences
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
=> TRYING TO STANDBY UVP5
sent: U013STBY_PRG!
UVP STBY_OK messages received
> Responding time = 0.25 sec.
=> READING SEQUENCES PROGRAMMED IN UVP5 
sent: U013READ_SEQ!
ret : 0000_0001_fullhd_I_0000000000_I_0000000000
ALL UVP SEQUENCE messages received
sent: U050SET_SEQ_0000_mixtfd_D_0000000017_D_0000006000!
ret: V020SET_SEQ_0000_OK!
sent: U019SET_PPREP_0008!
ret: V017SET_PPREP_OK!
sent: U020SET_FLAG_1_0030!
ret: V016SET_FLAG_OK!
UVP RUN_OK messages received
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : TURN ON UVP5 light (test / alignment)
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
=> TRYING TO STANDBY UVP5
sent: U013STBY_PRG!
UVP STBY_OK messages received
> Responding time = 0.3 sec.
=> POWERING LIGHTS 
sent: U024SET_OUTPUT_00000001!
UVP5 LIGHT POWERED
=> START LIGHTS for 30s
sent: U024SET_OUTPUT_00000101!
UVP5 LIGHT ON for 30s
=> STOP LIGHT and POWER OFF
sent: U024SET_OUTPUT_00000000!
UVP5 LIGHT FLASHING for 30s
UVP RUN_OK messages received
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : TURN ON UVP5 light (test / alignment)
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
=> TRYING TO STANDBY UVP5
sent: U013STBY_PRG!
UVP STBY_OK messages received
> Responding time = 0.35 sec.
=> POWERING LIGHTS 
sent: U024SET_OUTPUT_00000001!
UVP5 LIGHT POWERED
=> START LIGHTS for 30s
sent: U024SET_OUTPUT_00000101!
UVP5 LIGHT ON for 30s
=> STOP LIGHT and POWER OFF
sent: U024SET_OUTPUT_00000000!
UVP5 LIGHT FLASHING for 30s
UVP RUN_OK messages received
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : TURN ON UVP5 light (test / alignment)
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
=> TRYING TO STANDBY UVP5
sent: U013STBY_PRG!
UVP STBY_OK messages received
> Responding time = 0.3 sec.
=> POWERING LIGHTS 
sent: U024SET_OUTPUT_00000001!
UVP5 LIGHT POWERED
=> START LIGHTS for 30s
sent: U024SET_OUTPUT_00000101!
UVP5 LIGHT ON for 30s
=> STOP LIGHT and POWER OFF
sent: U024SET_OUTPUT_00000000!
UVP5 LIGHT FLASHING for 30s
UVP RUN_OK messages received
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : Set GAIN for ANALOG output
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
=> TRYING TO STANDBY UVP5
sent: U013STBY_PRG!
UVP STBY_OK messages received
> Responding time = 0.4 sec.
>  New GAIN 3 sent 
sent: U024SET_CNA_0_0003_0000!
ret: V027SET_CNA_0_0003_0000_OK!
UVP RUN_OK messages received
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : SWITCH mode (advanced/user)
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : DELETE DATA in UVP5
-----------------------------------------------------------------------------------------------------------------
> COM4 OPEN NOW
=> TRYING TO STANDBY UVP5
sent: U013STBY_PRG!
UVP STBY_OK messages received
> Responding time = 0.35 sec.
=>  CHECKING CAMERA STATUS
sent: S013WATCHDOG!
sent: S013WATCHDOG!
=>  STARTING CAMERA
sent: U017START_HD_CAM!
=> CHECKING if UVP5 CAMERA application is running
ret: U017START_HD_CAM!
=>  CHECKING CAMERA STATUS
sent: S013WATCHDOG!
sent: S013WATCHDOG!
ret: C042WATCHDOG_97968*097968*07*xxxxxxxxxxxx!
-----------------------------------------------------------------------------------------------------------------
FD free space = 97968 Mo (754 %)
HD free space = 97968 Mo (NaN %)
-----------------------------------------------------------------------------------------------------------------
CAMERA STARTED & RESPONDING
Remaining casts in FD : 1
Remaining casts in HD : 0
sent: S013RESET_FD!
uvp drive being deleted: //uvp5sn201/FD
Casts to delete : 1
Casts to delete : 0
=>  CHECKING CAMERA MEMORY AFTER DELETE 
sent: S013WATCHDOG!
ret: C042WATCHDOG_97971*097971*07*xxxxxxxxxxxx!
-----------------------------------------------------------------------------------------------------------------
FD MAXIMUM space (free now) = 97971 Mo
HD MAXIMUM space (free now) = 97971 Mo
-----------------------------------------------------------------------------------------------------------------
=>  CAMERA being stopped NOW
sent: S013EXITSOFT!
> CAMERA APPLICATION STOPPED
sent: U016STOP_HD_CAM!
CAMERA OFF
UVP RUN_OK messages received
> COM4 CLOSED NOW
-----------------------------------------------------------------------------------------------------------------
ACTION : EXIT PILOT MODULE
-----------------------------------------------------------------------------------------------------------------
> COM4 CLOSED
-----------------------------------------------------------------------------------------------------------------
PILOT MODULE CLOSED
-----------------------------------------------------------------------------------------------------------------