SBE 37-SMP MicroCAT C-T (P optional) Recorder
Photo Gallery

Overall view, with Plastic ShallowCAT housing (titanium housing available) -- connector end cap, mounting brackets, conductivity cell, thermistor, and anti-foulant devices

Conductivity cell guard, Thermistor, Anti-Foulant devices

Conductivity cell guard, intake/exhaust protective label (remove label for deployment)

 

Optional Pressure sensor (with clamp removed)

 

Connector end cap and cable mounting guide, opening housing to remove batteries

Connector end cap,
battery pack assembly

Battery pack -- twelve 3.6-volt AA lithium batteries, Saft LS14500 (Note: battery pack has yellow cover plate; battery pack with red cover plate cannot be used in newer 37-SMP)

Optional Storm plastic shipping case with custom foam inserts --
holds up to 4 MicroCATs (except IDO or ODO)

Overall view, with Titanium housing -- connector end cap, mounting brackets, conductivity cell, thermistor, and anti-foulant device cup

Overall view, with Plastic ShallowCAT housing -- connector end cap, mounting brackets, conductivity cell, thermistor, and anti-foulant device cup

Conductivity cell guard, Conductivity cell, Thermistor, Anti-Foulant device cup and plugs

Conductivity cell guard, Anti-Foulant device cup, and Anti-Foulant device caps

Conductivity cell guard, Conductivity Cell, and Thermistor

 

Optional Pressure sensor, Thermistor, Conductivity cell, and Pump exhaust  (with conductivity cell guard removed)

Connector end cap and mounting bracket, opening housing to remove batteries

Connector end cap,
battery pack assembly

Battery pack -- twelve 3.6-volt AA lithium batteries, Saft LS14500 (Note: replaced old battery pack in 2008)

Optional Storm plastic shipping case with custom foam inserts --
holds up to 4 MicroCATs (except IDO or ODO)