Spare Parts

Links to other Sales pages:

• Sea-Bird Product Configuration Options and Accessories
• Cables (a few spare parts kits include cables; otherwise, see the Cables page)
• Mount kits for Sea-Bird sensors (for example, mounting an SBE 43 dissolved oxygen sensor to an SBE 9plus CTD)
• Mount kits for Third Party sensors (for example, mounting a WET Labs transmissometer to an SBE 9plus CTD)
• Bulkhead connectors, dummy plugs, and locking sleeves
• Ready to get a quote or place an order? See our Sales Information page.
• Want to lease equipment? See our Equipment Leasing page.

23041  Zinc anode ring for end cap

 

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit -- installs on SBE 4 & SeaCATs (not SeaCATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. (see Application Note 70)

50033  O-ring kit for SBE 4 (document 67067)

50246  O-ring kit for SBE 4 Quick Disconnect

23548  Zinc anode ring for end cap

 

Pump Housing

50062  Pump housing O-ring kit for SBE 5M (titanium or plastic housing), 5T, or 5P (document 67029)

23594  Pump end cap retainer

50391  Pump impeller replacement kit (includes impeller, O-rings, thrust washer; see Application Note 75: Maintenance of SBE 5T, 5P, and 5M Pumps))

23593  Pump head

Plumbing

23337  Air bleed valve, pump plumbing -- for profiling CTD deployed in vertical orientation

30387  1/2" nylon hose barb Y-fitting -- for profiling CTD deployed in vertical orientation

23557  Quick disconnect connector, inserts into conductivity cell

23555  Quick disconnect connector, for 1/2" diameter tubing, receives tubing

30385  Tygon tubing, 1/4" ID X 3/8" OD, 2 m -- part of conductivity cell filling/storage device PN 50087

30382  Tygon tubing, 1/4" ID X 5/16" OD, 2 m -- connects T duct to C duct

30388  Tygon tubing, 1/2" ID X 3/4" OD, 2 m -- main plumbing

31450  Tygon tubing, 1/2" ID X 3/4" OD, 2 m, Black -- main plumbing, use to minimize exposure to light

30384  Tygon tubing, 7/16" ID X 9/16" OD, 2 m -- cell soaker tubing for SBE 4

30579  Tygon tubing, 3/8" ID X 1/2" OD, 2 m -- fits over ends of SBE 43 plenum

 

23041  Zinc anode ring for end cap

 

23041  Zinc anode ring for end cap

 

90199  CTD plumbing kit (document 67022)

90088  CTD plumbing & TC duct tubing kit (document 67018)
Note: This kit includes flexible tubing for plumbing TC duct, but does not include TC duct. For TC duct parts, see 90085 below.

90085  TC duct & plumbing kit (document 67051)

50070  O-ring kit (document 67009)

50246  Conductivity disconnect fitting spare O-ring kit

50089  Jackscrew kit

50025  Pressure sensor oil refill kit (document 67066)

50024  Hardware kit for SBE 9plus with aluminum housing (document 67053)

50138  Hardware kit for SBE 9plus with titanium housing (document 67131)

varies  Conductivity cell tube support kit (document 67068)

50088  Seaspares kit for SBE 9plus with aluminum housing & XSG/AG connectors (hardware, O-rings, cables, dummy plugs, connectors, zinc anodes, fuses, etc.) (document 67025)

50139  Seaspares kit for SBE 9plus with titanium housing & XSG/AG connectors (hardware, O-rings, cables, dummy plugs, connectors, fuses, etc.) (document 67128)

50321  Seaspares kit for SBE 9plus with aluminum housing & wet-pluggable connectors (hardware, O-rings, cables, dummy plugs, connectors, zinc anodes, fuses, etc.) (document 67129)

50322  Seaspares kit for SBE 9plus with titanium housing & wet-pluggable connectors (hardware, O-rings, cables, dummy plugs, connectors, fuses, etc.) (document 67130)

31634  Hardigg shipping case (AL4915-1105) (photo)

 

50002  O-ring kit for SBE 13 (3400 m) (document 67064)

50014  O-ring kit for SBE 13 (6800 m) (document 67012)

50017  Dissolved Oxygen module refurbishment kit for SBE 13B or 23B Beckman (document 67031)

 

Batteries

801483   9D (10.8 V / 42 AH) lithium battery pack kit (document 67143) -- see notes below.

801479   3DD (10.8 V / 30 AH) lithium battery pack kit (document 67144) -- see notes below.

NOTES:
1. Batteries not included.
2. Lithium battery packs cannot be used with a 16plus, 16plus-IM, 16plus V2, or 16plus-IM V2 that is integrated with SBE 5T or 5P pump, because of current limitations. They can be used with an instrument with no pump, or with an SBE 5M pump.

Hardware, O-ring, & Mounting Kits

60021  Battery end cap hardware & O-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50274  O-ring kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67102)

50273  Hardware kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67103)

90087  CTD plumbing kit (document 67108)

varies  Cable clamp kit for SBE 37-IM, 37-IMP, 16plus-IM, 16plus-IM V2, 44, or UIMM (document 67142)

50434  Seaspares kit for SBE 16plus V2 or 19plus V2 with XSG/AG connectors (hardware, O-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67196) -- ONLY applicable to 16plus V2 or 19plus V2

50435  Seaspares kit for SBE 16plus V2 or 19plus V2 with wet-pluggable connectors (hardware, O-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67197) -- ONLY applicable to 16plus V2 or 19plus V2

50276  Seaspares kit for SBE 16plus or 19plus with XSG/AG connectors (hardware, O-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67104) -- NOT applicable to 16plus V2 or 19plus V2

50301  Seaspares kit for SBE 16plus or 19plus with wet-pluggable connectors (hardware, O-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67116) -- NOT applicable to 16plus V2 or 19plus V2

50323  Seaspares kit for SBE 16plus-IM or 16plus-IM V2 with XSG/AG connectors (hardware, O-rings, dummy plugs, connectors, etc.) (document 67132)

50324  Seaspares kit for SBE 16plus-IM or 16plus-IM V2 with wet-pluggable connectors (hardware, O-rings, dummy plugs, connectors, etc.) (document 67133)

Miscellaneous

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

233186  High-head pressure port plug for muddy/biologically productive environments (for instrument with Druck pressure sensor) (Application Note 84)

 

801483   9D (10.8 V / 42 AH) lithium battery pack kit (document 67143) -- NOTE: batteries not included.

801479   3DD (10.8 V / 30 AH) lithium battery pack kit (document 67144) -- NOTE: batteries not included.

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit -- installs on SBE 4 & SeaCATs (not SeaCATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. (see Application Note 70)

50012  O-ring kit for SBE 16 or 19 (document 67026)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

50082  Hardware kit for SBE 16 with titanium housing  (document 67081)

60021  Battery end cap hardware & O-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

90087  CTD plumbing kit (document 67108)

50072  Support kit for SBE 16 or 19 (document 67017)

 

Batteries

801512  12 NiMH cells in rechargeable drop-in pack (14.4V/8Ah)

90504  NiMH battery charger for 6, 9, or 12 cells / 8 Ah D-cell packs. Provides full recharge in 2 hours, includes AC power cord & battery charging cable

801642  12 Ni-Cad cells in drop-in pack, 14.4V, 4.4 AH
(Note: As of 2011, Sea-Bird does not manufacture the 90226 Ni-Cad battery charger, because parts are no longer available. We are still able to provide the battery pack, for customers who already have a charger.)

Hardware & O-ring Kits

50051  Small hardware & O-ring kit for SBE 17plus with aluminum housing (document 67014)

50140  Small hardware & O-ring kit for SBE 17plus with titanium housing (document 67125)

60021  Battery end cap for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

23155.1  Magnetic switch kit for SBE 17plus (drawing 20193 for switch; kit also includes 1 magnet)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

50105  Support kit for SBE 17plus with aluminum housing & XSG/AG connectors (hardware, O-rings, cable, dummy plugs, connectors, etc.) (document 67134)

50141  Support kit for SBE 17plus with titanium housing & XSG/AG connectors (hardware, O-rings, cable, dummy plugs, connectors, etc.) (document 67135)

50328  Support kit for SBE 17plus with aluminum housing & wet-pluggable connectors (hardware, O-rings, cable, dummy plugs, connectors, etc.) (document 67136)

50329  Support kit for SBE 17plus with titanium housing & wet-pluggable connectors (hardware, O-rings, cable, dummy plugs, connectors, etc.) (document 67137)

 

30459 Plastic soaker bottle for pH probe

50020  pH sensor O-ring kit

24023P pH probe for SBE 18, 22, 27, or 30 (document 67072)

23190C  pH electrode guard

25001  KCl soaker solution, 500 ml bottle

23041  Zinc anode ring for end cap

 

Batteries

801511  9 NiMH cells in rechargeable drop-in pack (10.8V/8 Ah)

90504  NiMH battery charger for 6, 9, or 12 cells / 8 Ah D-cell packs. Provides full recharge in 2 hours, includes AC power cord & battery charging cable

801641  9 Ni-Cad cells in drop-in rechargeable pack (10.8V/4.4 Ah)
(Note: As of 2011, Sea-Bird does not manufacture the 90226 Ni-Cad battery charger, because parts are no longer available. We are still able to provide the battery pack, for customers who already have a charger.)

Hardware & O-ring Kits

41124  Battery cover/contact plate, replaces 80076.1

60021  Battery end cap hardware & O-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50274  O-ring kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67102)

50273  Hardware kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67103)

50275  Magnetic switch kit for SBE 19plus or 19plus V2 (document 67101)

90087  CTD plumbing kit (document 67108)

50434  Seaspares kit for SBE 16plus V2 or 19plus V2 with XSG/AG connectors (hardware, O-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67196) -- ONLY applicable to 16plus V2 or 19plus V2

50435  Seaspares kit for SBE 16plus V2 or 19plus V2 with wet-pluggable connectors (hardware, O-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67197) -- ONLY applicable to 16plus V2 or 19plus V2

50276  Seaspares kit for SBE 16plus or 19plus with XSG/AG connectors (hardware, O-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67104) -- NOT applicable to 16plus V2 or 19plus V2

50301  Seaspares kit for SBE 16plus or 19plus with wet-pluggable connectors (hardware, O-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67116) -- NOT applicable to 16plus V2 or 19plus V2

Cages

801269 *  Stainless-steel protective cage, 40 inch (101 cm) tall (drawing 22009 and document 67171) -- for 19plus or 19plus V2 with strain-gauge pressure sensor

801270 *  Stainless-steel protective cage, 48 inch (123 cm) tall (drawing 22010 and document 67171) -- for 19plus V2 with Digiquartz pressure sensor

* Note: PN 801269 and 801270 cages do not fit inside SBE 32 Carousel extension stand, for mounting horizontally below Carousel. If mounting a 19plus or 19plus V2 (with strain gauge pressure sensor) in extension stand, use PN 23892 cage instead (drawing 20893); contact Sea-Bird for a 19plus V2 with Quartz pressure sensor.

232012  Stainless-steel protective cage with small footprint, for deploying through ice (drawing 22149 and photo)

Miscellaneous

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50288  Moored mode conversion kit for SBE 19plus or 19plus V2 (document 67114)

233186  High-head pressure port plug for muddy/biologically productive environments (for instrument with Druck pressure sensor, moored application) (Application Note 84)

31634  Hardigg shipping case (AL4915-1105), for SBE 19plus or 19plus V2 in cage (photo of 9plus in this shipping case)
Note: 19plus V2 with Digiquartz pressure sensor requires a longer cage (PN 801270) than 19plus V2 with strain-gauge pressure sensor. PN 801270 cage does not fit in this Hardigg shipping case; contact Sea-Bird to discuss purchasing a larger case.

 

50012  O-ring kit for SBE 16 or 19 (document 67026)

50009  O-ring kit for SBE 19 (document 67076)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

50249  Small hardware kit for SBE 19 (document 67015)

60021  Battery end cap hardware & O-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50026  Magnetic switch kit for SBE 19 or 25 (document 67035)

50236  TC duct kit for SBE 19 (document 67088)

90087  CTD plumbing kit (document 67108)

50072  Support kit for SBE 16 or 19 (document 67017)

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit -- installs on SBE 4 & SeaCATs (not SeaCATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. (see Application Note 70)

232012  Stainless-steel protective cage with small footprint, for deploying through ice (drawing 22149 and photo)

 

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit -- installs on SBE 4 & SeaCATs (not SeaCATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. For SBE 21s shipped before 2002. (see Application Note 70)

50106  Hardware & O-ring kit for SBE 21 (document 67021)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

50298  Support kit for SBE 21 compatible with SBE 38 remote temperature sensor (hardware, O-rings connectors, cell cleaning supplies, etc.) (document 67119)

50107  Support kit for SBE 21 compatible with SBE 3 remote temperature sensor (hardware, O-rings, connectors, cell cleaning supplies, etc.) (document 67060)

23388.2 SBE 21 top end cap blank (flow chamber seal when sensors removed)

90399.1  SBE 21 electronics/sensor assembly (SBE 38 interface)

90387.1  SBE 21 electronics/sensor assembly (SBE 3 interface)

23188.2  PVC water jacket/manifold assembly (no electronics or sensor housing)

 

24023 pH probe for SBE 18, 22, 27, or 30 (document 67072)

 

50017  Dissolved Oxygen module refurbishment kit for SBE 13B or 23B Beckman (document 67031)

 

Batteries

802113  12-cell Alkaline battery pack (alkaline D-cell batteries not included)

Hardware & O-ring Kits

50246  Conductivity disconnect fitting spare O-ring kit

90199  CTD plumbing kit (document 67022)

90088  CTD plumbing & TC duct tubing kit (document 67018)

90085  TC duct & plumbing kit (document 67051)

23155.1   Plunger switch assembly

50507  Small hardware & O-ring kit for SBE 25plus (document 67221)

50509  Support kit for SBE 25plus with XSG/AG connectors (hardware, O-rings, cables, connectors, dummy plugs, zinc anodes, etc.) (document 67223)

50508  Support kit for SBE 25plus with wet-pluggable connectors (hardware, O-rings, cables, connectors, dummy plugs, zinc anodes, etc.) (document 67222)

Cage

23302C  SBE 25 stainless steel protective cage

Miscellaneous

31634  Hardigg shipping case (AL4915-1105) (photo of 9plus in this shipping case)

Batteries

801511  9 NiMH cells in rechargeable drop-in pack (10.8V/8 Ah)

90504  NiMH battery charger for 6, 9, or 12 cells / 8 Ah D-cell packs. Provides full recharge in 2 hours, includes AC power cord & battery charging cable

801641  9 Ni-Cad cells in drop-in rechargeable pack (10.8V/4.4 Ah)
(Note: As of 2011, Sea-Bird does not manufacture the 90226 Ni-Cad battery charger, because parts are no longer available. We are still able to provide the battery pack, for customers who already have a charger.)

Hardware & O-ring Kits

50069  Small hardware & O-ring kit for SBE 25 (document 67030)

60021  Battery end cap hardware & O-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50026  Magnetic switch kit for SBE 19 or 25 (document 67035)

50246  Conductivity disconnect fitting spare O-ring kit

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

90199  CTD plumbing kit (document 67022)

90088  CTD plumbing & TC duct tubing kit (document 67018)

90085  TC duct & plumbing kit (document 67051)

50025  Pressure sensor oil refill kit (document 67066)

50332  Support kit for SBE 25 with XSG/AG connectors (hardware, O-rings, cables, connectors, dummy plugs, zinc anodes, etc.) (document 67127)

50331  Support kit for SBE 25 with wet-pluggable connectors (hardware, O-rings, cables, connectors, dummy plugs, zinc anodes, etc.) (document 67126)

Cage

23302C  SBE 25 stainless steel protective cage

Miscellaneous

31634  Hardigg shipping case (AL4915-1105) (photo of 9plus in this shipping case)

 

60021  Battery end cap hardware & O-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

50056  Hardware kit for SBE 26/26plus, 53, or 54 (document 67016)

801483  9D (10.8 V / 42 AH) lithium battery pack kit (document 67143) for SBE 26 (not plus) -- NOTE: batteries not included.

801575  Battery Cover Spacer / Adapter, 12 D alkaline cells to 6 DD Electrochem Lithium cells

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit (for SBE 4 Conductivity Sensor) -- installs on SBE 4 & SeaCATs (not SeaCATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. (see Application Note 70)

 

24023P pH probe for SBE 18, 22, 27, or 30 (document 67072)

30459  Plastic soaker bottle for pH probe

50020  pH sensor O-ring kit

23190C  pH electrode guard

25001  KCl soaker solution, 500 ml bottle

23041  Zinc anode ring for end cap

50025  Pressure sensor oil refill kit (document 67066)

23041  Zinc anode ring for end cap

 

24023 pH probe for SBE 18, 22, 27, or 30 (document 67072)

Note: Full size SBE 32 comes in 2 frame sizes:
Small Frame -- 1-inch diameter for 12 place (through 12-liter bottle size) and 24 place (through 2.5-liter bottle size), and
Large Frame -- 1.375-inch diameter for 12 place (larger than 12-liter bottle size) and 24 place (larger than 2.5-liter bottle size)

Frame & Electronics

50151  O-ring kit for SBE 32 (document 67050)

50113  Hardware kit for SBE 32 with small frame (document 67010)

50116  Hardware kit for SBE 32 with large frame (document 67086)

50142  Hardware kit for SBE 32C or 32SC (document 67011)

50195  Hardware kit for SBE 32SC (document 67046)

50130.1  Hardware kit for SBE 32C (document 67048)

50130  Hardware kit for SBE 32C or 32SC (document 67047)

50111  Lifting bail kit for SBE 32 with small frame, 32C, or 32SC (document 67033)

50133  O-ring & hardware kit for SBE 32 with aluminum pylon (for latches & pylon) (document 67023)

50279  O-ring & hardware kit for SBE 32 with titanium pylon (for latches & pylon) (document 67109)

50172  O-ring & hardware kit for SBE 32 (stainless steel) pylon  (document 67054)

50211  Extension stand u-bolt kit for SBE 32 with small frame (document 67078)

50297  Deck pad assembly kit for SBE 32 with small frame (document 67117)

50296  Deck pad assembly kit for SBE 32 with large frame (document 67117)

50112  Frame assembly kit for SBE 32 with small frame (document 67049)

50115  Frame assembly kit for SBE 32 with large frame (document 67079)

50340  Complete hardware kit for SBE 32 with small frame (document 67139)

50341  Complete hardware kit for SBE 32 with large frame (document 67140)

50342  Complete hardware kit for SBE 32C or 32SC (document 67141)

50123  Tool kit for SBE 32, 32C, or 32SC (document 67099)

50439  Frame coating repair kit for SBE 32, 32C, or 32SC (application note 88)

Latches

50299  Latch kit for SBE 32, 32C, 32SC, 55 (document 67157) -- for 12-or 24-bottle Carousel
Note: See SBE 55 and SBE 32 Change Notice for information on latch changes that were implemented in 2011; new latch kit part number is 50496.

50428  Latch kit for SBE 32 -- for 36-bottle Carousel (document 67157)
Note: See SBE 55 and SBE 32 Change Notice for information on latch changes that were implemented in 2011.

Bottle Hardware

50265  Single bottle lanyard replacement kit (5 Nico-press sleeves, 8 feet of monofilament line, 1 brass hook, 2 plastic lanyard balls)

50135  Bottle repair kit for OTE water sample bottle (includes O-ring kit, 2 end plugs, latex rubber power cord (0.9 m), drain valve, air vent, brass hook, Nicopress sleeves, monofilament (6 m), 2 polyethylene balls)

Trace Metals / Geotraces Carousels (consult Sea-Bird to verify appropriate kit for your Carousel)

50452  Hardware kit for trace metals Carousel with SBE 19plus V2 mounted vertically to Carousel frame (document 67210)

50436  Hardware kit for Geotraces Carousel with SBE 9plus mounted vertically below Carousel (document 67198)

 

50175  Fixed point cell bushing, spare (not for SBE 35RT)

23041  Zinc anode ring for end cap

 

Batteries

50442     SBE 37 & 44 Red retrofit battery holder (PN 801797) and twelve AA lithium cells (PN 50441) for SBE 37 (SM, SMP, IM, IMP with firmware version < 4.0) and SBE 44 (see notice about retrofit battery pack and Application Note 89)

801797   Red retrofit battery holder (7V nominal, Version 1) for SBE 37 (SM, SMP, IM, IMP with firmware version < 4.0) and SBE 44, for use with twelve 3.6V AA lithium cells (see notice about retrofit battery pack and Application Note 89)

801863   Yellow battery holder (14V nominal, Version 2) for SBE 37 (SM, SMP, IM, IMP with firmware version > 4.0) and SBE 37 with oxygen (SMP-IDO, IMP-IDO, SMP-ODO, IMP-ODO), for use with twelve 3.6V AA lithium cells

50441     SBE 37 and 44 lithium batteries, package of twelve 3.6V AA cells (Saft LS 14500)

Note: Mechanical design changes were implemented along with version 4.0 firmware for pumped SBE 37s without oxygen. Sea-Bird began selling 37-SMP and 37-IMP with version 4.0 firmware in 2011. We anticipate 37-SM and 37-IM with version 4.0 firmware will be released in 2014. (Information on differences between red and yellow battery holders, which are not interchangeable.)

Hardware & O-ring Kits

SMP-IDO & SMP-ODO

60056  Hardware & O-ring kit for SBE 37-SMP-IDO or SMP-ODO (document 67212)

SM & SMP

60023  Hardware & O-ring kit for SBE 37-SM or 37-IM (instruments delivered in 1999 and earlier, with battery pack that requires knob to remove from instrument) (document 67032)

60023.1  Hardware & O-ring kit for SBE 37-SM or 37-IM (instruments delivered in 1999 and earlier) (document 67063)

60035  Hardware & O-ring kit for SBE 37-SM or 37-SMP (instruments delivered after 1999; compatible with obsolete 50243 batteries) with firmware version < 4.0 (document 67092)

60049  Hardware & O-ring kit for SBE 37-SM or 37-SMP with titanium housing (instruments delivered after 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) with firmware version < 4.0 (document 67201)

60053  Hardware & O-ring kit for SBE 37-SM or 37-SMP with plastic housing (instruments delivered after 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) with firmware version < 4.0 (document 67206)

60056  Hardware & O-ring kit for SBE 37-SMP with firmware version > 4.0 (document 67212)

Note: Mechanical design changes were implemented along with version 4.0 firmware for pumped SBE 37s without oxygen. Sea-Bird began selling 37-SMP with version 4.0 firmware in 2011. We anticipate 37-SM with version 4.0 firmware will be released in 2014.

SIP-IDO & SIP-ODO

60060  Hardware & O-ring kit for SBE 37-SIP-IDO or SIP-ODO (document 67215)

SI & SIP

60024  Hardware & O-ring kit for SBE 37-SI (instruments delivered in 1999 and earlier) (document 67083)

60034  Hardware & O-ring kit for SBE 37-SI or 37-SIP (instruments delivered after 1999) with firmware version < 4.0, with titanium housing  (document 67091)

60051  Hardware & O-ring kit for SBE 37-SI or 37-SIP (instruments delivered after 1999) with firmware version < 4.0, with plastic housing  (document 67204)

60060  Hardware & O-ring kit for SBE 37-SI or 37-SIP with firmware version > 4.0 (document 67215)

Note: Mechanical design changes were implemented along with version 4.0 firmware for pumped SBE 37s without oxygen. Sea-Bird began selling 37-SIP with version 4.0 firmware in 2011. We anticipate 37-SI with version 4.0 firmware will be released in 2014.

IMP-IDO & IMP-ODO

60055  Hardware & O-ring kit for SBE 37-IMP-IDO or 37-IMP-ODO (document 67209)

IM & IMP

60033  Hardware & O-ring kit for SBE 37-IM, 37-IMP, or 44 (instruments delivered after 1999; compatible with obsolete 50243 batteries) with firmware version < 4.0  (document 67052)

60050  Hardware & O-ring kit for SBE 37-IM, 37-IMP, or 44 with titanium housing (instruments delivered after 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) with firmware version < 4.0 (document 67202)

60054  Hardware & O-ring kit for SBE 37-IM, 37-IMP, or 44 with plastic housing (instruments delivered after 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) with firmware version < 4.0 (document 67207)

60055  Hardware & O-ring kit for SBE 37-IM or 37-IMP with firmware version > 4.0 (document 67209)

Note: Mechanical design changes were implemented along with version 4.0 firmware for pumped SBE 37s without oxygen. Sea-Bird began selling 37-IMP with version 4.0 firmware in 2011. We anticipate 37-IM with version 4.0 firmware will be released in 2014.

Mount Kits

SM, SMP, SI, SIP

50239  Welded-bolt cable clamp kit for SBE 37-SM (instruments delivered in 1999 and earlier) (document 67034)

varies  Cable clamp kit for SBE 37-SMP, 37-SM, 37-SIP, or 37-SI (instruments delivered after 1999) with firmware version < 4.0 (document 67094)

50264  Through-bolt mount SBE 37-SMP, 37-SM, 37-SIP, or 37-SI (instruments delivered after 1999) with firmware version < 4.0 (document 67096)

varies  Cable clamp kit for SBE 37-SMP or 37-SIP with firmware version > 4.0 (document 67219)

50479  Through-bolt mount SBE 37-SMP or 37-SIP with firmware version > 4.0 (document 67218)

Note: Mechanical design changes were implemented along with version 4.0 firmware for pumped SBE 37s without oxygen. Sea-Bird began selling 37-SMP and 37-SIP with version 4.0 firmware in 2011. These mechanical design changes are not applicable to the 37-SM and 37-SI.

SMP-IDO, SMP-ODO, SIP-IDO, SIP-ODO

varies  Cable clamp kit for SBE 37-SMP-IDO, 37-SMP-ODO, 37-SIP-IDO, 37-SIP-ODO (document 67219)

50479  Through-bolt mount SBE 37-SMP-IDO, 37-SMP-ODO, 37-SIP-IDO, 37-SIP-ODO (document 67218)

IM, IMP

varies  Cable clamp kit for SBE 37-IMP / 37-IM (with firmware version < 4.0), 16plus-IM, 16plus-IM V2, 44, or UIMM (instruments delivered after 1999) (document 67142)

varies  Cable clamp kit for SBE 37-IMP with firmware version > 4.0 (document 67220)

Note: Mechanical design changes were implemented along with version 4.0 firmware for pumped SBE 37s without oxygen. Sea-Bird began selling 37-IMP with version 4.0 firmware in 2011. These mechanical design changes are not applicable to the 37-IM.

IMP-IDO, IMP-ODO

varies  Cable clamp kit for SBE 37-IMP-IDO, 37-IMP-ODO (document 67220)

Miscellaneous

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

233186  High-head pressure port plug for muddy/biologically productive environments (for use with SBE 37 [SM, SMP, IM, IMP, SI, SIP] with firmware version < 4.0; not for newer versions or for MicroCATs with oxygen) (Application Note 84)
Note: Mechanical design changes were implemented along with version 4.0 firmware. Sea-Bird began selling 37-SMP, IMP, and SIP with version 4.0 firmware in 2011. We anticipate 37-SM, IM, and SI with version 4.0 firmware will be released in 2014.

31632  Storm shipping case (iM2950) -- holds up to 4 MicroCATs (without oxygen) (photo)

TBD  Storm shipping case (iM2950) -- holds up to 3 IDO or ODO MicroCATs (SMP-IDO, SMP-ODO, SIP-IDO, SIP-ODO, IMP-IDO, IMP-ODO)

 

50504  Lithium batteries (spare), package of four 3.6V AA cells (Saft LS 14500)

varies  Cable clamp kit for SBE 39, for use with or without fairing/net fender (document 67162 & drawing 41396)

60042  Spares kit for SBE 39plus with no external connector (document 67159)

TBD  Spares kit for SBE 39plus with external connector

233186  High-head pressure port plug for muddy/biologically productive environments (for instrument with Druck pressure sensor) (Application Note 84)

31633  Storm shipping case (iM2600) -- holds up to 4 SBE 39plus with external connectors or 6 SBE 39plus with internal connectors (does not hold SBE 39plus with net fenders) (photo of case with 6 SBE 39plus with internal connectors)

22074  SBE 39 lithium battery, UltraLife U9VL, 9V

varies  Cable clamp kit for SBE 39, for use with or without fairing/net fender (document 67162 & drawing 41396)

60042  Spares kit for SBE 39 with serial number > 3000 (document 67159)

60032  Spares kit for SBE 39 with serial number < 3000 (document 67028)

60032.1  Spares kit for SBE 39 with low pressure Paine pressure sensor (document 67085)

233186  High-head pressure port plug for muddy/biologically productive environments (for instrument with Druck pressure sensor) (Application Note 84)

31633  Storm shipping case (iM2600) -- holds up to 4 SBE 39s with external connectors or 6 SBE 39s with internal connectors (does not hold SBE 39s with net fenders) (photo of case with 6 SBE 39s with internal connectors)

 

22095  SBE 39-IM lithium battery, 3.6V AA (R6), Saft LS 14500 (39-IM uses 2)

varies  Cable clamp & guide kit for SBE 39-IM (document 67161)

60043  Spares kit for 39-IM with serial numbers 3089 through 3100 (document 67163)

60044 Spares kit for 39-IM with serial numbers greater than 3100 (document 67167)

233186  High-head pressure port plug for muddy/biologically productive environments (Application Note 84)

31633  Storm shipping case (iM2600) -- holds up to 4 SBE 39-IMs (does not hold SBE 39-IMs with net fenders) (photo of case with 6 SBE 39s)

 

801617   SBE 43 Plenum Assembly, Version 2, Black Acetal

31450   Tygon tubing, 1/2" ID X 3/4" OD, 2 meters, Black

Batteries [see notice about retrofit battery pack and Application Note 89]

50442     SBE 37 & 44 retrofit battery holder (PN 801797) and twelve AA lithium cells (PN 50441)

801797   Retrofit battery holder for SBE 37 and SBE 44, for use with twelve 3.6V AA lithium cells

50441     SBE 37 and 44 lithium batteries, package of twelve 3.6V AA cells (Saft LS 14500)

Hardware, O-ring, & Mounting Kits

60033  Hardware & O-ring kit for SBE 37-IM, 37-IMP, or 44 (instruments delivered after 1999; compatible with obsolete 50243 batteries) (document 67052)

60050  Hardware & O-ring kit for SBE 37-IM, 37-IMP, or 44 with titanium housing (instruments delivered after 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) (document 67202)

60054  Hardware & O-ring kit for SBE 37-IM, 37-IMP, or 44 with plastic housing (instruments delivered after 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) (document 67207)

varies  Cable clamp kit for SBE 37-IM, 37-IMP, 16plus-IM, 16plus-IM V2, 44, or UIMM (document 67142)

 

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

60036  Hardware & O-ring kit for SBE 45 (document 67095)

 

60037  Hardware & O-ring kit for SBE 49 with titanium housing (document 67111)

60052  Hardware & O-ring kit for SBE 49 with plastic housing (document 67205)

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50312  Anti-foulant device in-line cap/cup assembly for SBE 49 or 52-MP (document 67123)

233186  High-head pressure port plug for muddy/biologically productive environments (Application Note 84)

 

233186  High-head pressure port plug for muddy/biologically productive environments (Application Note 84)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50312  Anti-foulant device in-line cap/cup assembly for SBE 49 or 52-MP (document 67123)

233186  High-head pressure port plug for muddy/biologically productive environments (Application Note 84)

 

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

60021  Battery end cap hardware & O-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50056  Hardware kit for SBE 26/26plus, 53, or 54 (document 67016)

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit (for SBE 4 Conductivity Sensor) -- installs on SBE 4 & SeaCATs (not SeaCATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. (see Application Note 70)

801575  Battery Cover Spacer / Adapter, 12 D alkaline cells to 6 DD Electrochem Lithium cells

 

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

60021  Battery end cap hardware & O-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50056  Hardware kit for SBE 26/26plus, 53, or 54 (document 67016)

 

Frame & Electronics

60021  Battery end cap hardware & O-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50421  Frame assembly hardware kit for SBE 55

50429  Jackscrew kit for SBE 55

50422  SBE 55 Universal CTD / Electronics Installation Kit (document 67179)

Latches

50496  Latch kit for SBE 32, 32C, 32SC, 55 (document 67157)
Note: See SBE 55 and SBE 32 Change Notice for information on latch changes that were implemented in May 2011.

Bottles & Bottle Hardware

801714  ECO 4-liter water sample bottle

50430  SBE 55 Bottle Mounting and Lanyard Kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67194)

50427  Bottle repair kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67185)

50424  Drain fitting kit for PN 801714 ECO 4-liter water sample bottle (document 67182)

50425  Air bleed kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67183)

50426  O-ring kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67184)

50135  Bottle repair kit for OTE water sample bottle (includes O-ring kit, 2 end plugs, latex rubber power cord (0.9 m), drain valve, air vent, brass hook, Nicopress sleeves, monofilament (6 m), 2 polyethylene balls) -- Note: Several early production models of SBE 55 were sold with Ocean Test Equipment (OTE) bottles instead of PN 801714 ECO 4-liter bottles. This repair kit is only for OTE bottles.

60059  Spares kit for SBE 56 (includes O-rings & desiccant capsules)

234372  Tool for easy opening of SBE 56

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26, 26plus, 52-MP, 53, 54, AFM, or PDIM

60021  Battery end cap hardware & O-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

30044  Zinc anode, 1 inch diameter, for end caps

 

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

30388  Tygon tubing, 1/2" ID X 3/4" OD, 2 m -- main plumbing

30579  Tygon tubing, 3/8" ID X 1/2" OD, 2 m -- fits over ends of SBE 43 plenum; main plumbing fits over this

 

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26, 26plus, 52-MP, 53, 54, AFM, or PDIM

30044  Zinc anode, 1 inch diameter, for end caps

 

varies  Cable clamp kit for SBE 37-IM, 37-IMP, 16plus-IM, 16plus-IM V2, 44, or UIMM (document 67142)

 

50006  Hardware kit for Battlespace Jr Profiler (document 67037)

50087  Conductivity cell filling & storage kit (document 67043)

50025  Pressure sensor oil refill kit (document 67066)

30411  Triton X-100, 500 ml

 

Kits are subject to change without notice.

Sea-Bird Home     Phone: (+1) 425-643-9866     E-mail: seabird@seabird.com