Brochure/specifications
Note: We do not publish prices on the website. Please contact us [seabird@seabird.com
or (+1) 425-643-9866] for pricing.
| Part # | Description | Notes |
| 7 | MICROSTRUCTURE CONDUCTIVITY SENSOR - - 6800 m depth, with probe. Includes Microfit software & complete documentation. Specify: probe configuration selection. |
 Shown with option 7-1[X] |
| SBE 7 Probe Configuration Selections -- MUST SELECT ONE | ||
| 7-1[X] | Cabled remote probe (80013.2X), [X = length] up to 3 m | Remote probe (shown above) minimizes effect of instrument housing & its wake on data. |
| 7-2 | Probe (80013.4) mounted to sensor housing | |
| SBE 7 Wet-Pluggable Connector Option | ||
| 7-3 | Wet-pluggable (MCBH) connector instead of Standard (XSG) connector |
 (Note: SBE 7 uses 6-pin AG-306 or MCBH-6M connector; photos are for illustration of differences between standard & wet-pluggable connectors). Wet-pluggable connectors may be mated in wet conditions. Their pins do not need to be dried before mating. By design, water on connector pins is forced out as connector is mated. However, they must not be mated or un-mated while submerged. Wet-pluggable connectors have a non-conducting guide pin to assist pin alignment & require less force to mate, making them easier to mate reliably under dark or cold conditions, compared to our standard (Impulse XSG/RMG) connectors. Like standard connectors, wet-pluggables need proper lubrication & require care during use to avoid trapping water in sockets. |
Product configuration options listing for all products
Additional cables, mount kits, and spares may be found at: Cables, Mount kits for Sea-Bird sensors, Mount kits for Third Party sensors, Spare parts
Sea-Bird Home Phone: (+1) 425-643-9866 Fax: (+1) 425-643-9954 E-mail: seabird@seabird.com