Sea-Bird Electronics            Products            Support            Software            Sales            Service            Search/Sitemap

SBE 17plus V2 SEARAM Memory and Carousel Auto Fire Module
for 9plus Underwater Unit
Configuration Details

div.gif (3429 bytes)

Brochure/specifications     Manual     Reference Sheet

Note: We do not publish prices on the website. Please contact us [seabird@seabird.com or (+1) 425-643-9866] for pricing.

Part # Description Notes
17plus V2 SEARAM (Version 2) Memory & Carousel Auto Fire Module for 9plus Underwater Unit - includes 16 MB memory, rechargeable NiMH (nickel metal hydride, 8.0 Ah) battery pack & 2 hour fast charger, SEARAM to CTD jumper cable & mount kit, 20 m data I/O cable (PN 801380) for connection to computer serial port, dummy plugs, SEASOFT software, & complete documentation. Specify: housing (depth) & connector selection. For photos of standard shipment, click here.

Autonomous CTD operation (no conducting wire required) is provided when 9plus CTD is controlled with 17plus. SEARAM provides power, stores data in memory, & also allows operation of SBE 32 or 32C Carousel Water Sampler with pre-programmed closure pressures.

  

Notes:
- Winch & cable not supplied by Sea-Bird.
- When used without water sampler, 9plus is deployed in vertical orientation.
- Standard & optional auxiliary sensors on 9plus not shown.
- Version of 17plus in current production is referred to as 17plus V2.
SBE 17plus Housing (depth) & Connector Selections -- MUST SELECT ONE
17p-1a Aluminum housing, 6800 m depth rating

Wet-pluggable connector (MCBH) -- photo not available
Match connector type to those on 9plus CTD & SBE 32 or 32C Carousel Water Sampler you will be using with 17plus. Wet-pluggable connector options include wet-pluggable connectors on 17plus bulkhead connectors & on data I/O & CTD/SEARAM cables. Wet-pluggable connectors may be mated in wet conditions. Their pins do not need to be dried before mating. By design, water on connector pins is forced out as connector is mated. However, they must not be mated or un-mated while submerged. Wet-pluggable connectors have a non-conducting guide pin to assist pin alignment & require less force to mate, making them easier to mate reliably under dark or cold conditions, compared to our standard (Impulse XSG/RMG) connectors. Like standard connectors, wet-pluggables need proper lubrication & require care during use to avoid trapping water in sockets.

We strongly recommend wet-pluggable connectors for 17plus. You must connect to 17plus on deck after each deployment to re-arm auto-fire mechanism. Wet-pluggable connectors provide better reliability given potential for rain, wave splash, etc.
(If cost is an issue, an alternative is to use a jumper cable, with a standard connector at 17plus end and a wet-pluggable connector at other end, to plug into a wet-pluggable data I/O cable. This allows you to mate / unmate a wet-pluggable connector to arm system. Contact Sea-Bird for quote for jumper cable.)
17p-1b Aluminum housing, 6800 m depth rating, with Wet-pluggable connectors
17p-1c Titanium housing, 7000 m depth rating
17p-1d Titanium housing, 7000 m depth rating, with Wet-pluggable connectors
17p-1e Titanium housing, 10,500 m depth rating
17p-1f Titanium housing, 10,500 m depth rating, with Wet-pluggable connectors
SBE 17plus Spares & Accessories
801512 12 NiMH cells in rechargeable drop in pack (14.4v/8.0 Ah)
17plus comes standard with rechargeable NiMH batteries & charger; these are spares. Batteries are easily accessed by unscrewing battery end cap. 17plus can also be deployed with Ni-Cad or alkaline batteries.
90504 NiMH Battery Charger for 6, 9 or 12-cell/8.0 Ah D-cell packs. Provides full recharge in 2 hours, includes AC power cord & battery charging cable.
20200 USB to Serial Port Adapter, FTDI UC232R-10 (connects computers with USB ports to RS-232 instruments) Many newer PCs & laptop computers have USB port(s) instead of RS-232 serial port(s). USB serial adapter plugs into USB port, & allows a serial device to be connected through adapter. Multi-port adapters are available from other companies; see Application Note 68.
801225 Data I/O cable, Standard connector (RMG-4FS) with DB-9S, 2.4 m (DN 32421) These test cables are used for setting up system & uploading data from memory after recovery. Applicable 20 m cable is included with 17plus; these are spares.
801374 Data I/O cable, Wet-pluggable (MCIL-4FS) with DB-9S, 2.4 m (DN 32715)
801380 Data I/O cable, Standard connector (RMG-4FS) with DB-9S, 20 m shielded (DN 31222)
801421 Data I/O cable, Wet-pluggable connector (MCIL-4FS) with DB-9S, 20 m shielded (DN 32789)
50105 SEARAM Spares Kit (for aluminum housing with Standard connectors), includes spare jumper cable, connectors, dummy plugs, & other hardware Order appropriate spares kit for housing type & connector type on 17plus:
  • 50105 for aluminum 17plus with standard connectors -- See document 67134 for complete listing of parts.
  • 50328 for aluminum 17plus with wet-pluggable connectors -- See document 67136 for complete listing of parts.
  • 50141 for titanium 17plus with standard connectors -- See document 67135 for complete listing of parts.
  • 50329 for titanium 17plus with wet-pluggable connectors -- See document 67137 for complete listing of parts.
50328 SEARAM Spares Kit (for aluminum housing with Wet-pluggable connectors), includes spare jumper cable, connectors, dummy plugs, & other hardware
801642 12 Ni-Cad cells in drop-in pack, 14.4V, 4.4 AH (replaces PN 80259) Rechargeable Ni-Cad batteries & charger are available for use with 17plus. Batteries are easily accessed by unscrewing battery end cap. 17plus can also be deployed with NiMH (standard) or alkaline batteries.

Note: As of January 2011, Sea-Bird does not manufacture the 90226 Ni-Cad battery charger, because parts are no longer available. We are still able to provide the battery pack, for customers who already have a charger.

 
90059 115 VAC power/test junction box with cables Junction box provides external power supply for use during setup & data upload, so 17plus batteries will not be drawn down.
90046 230 VAC power/test junction box with cables

 

Product configuration options listing for all products

Additional cables, mount kits, and spares may be found at: Cables, Mount kits for Sea-Bird sensors, Mount kits for Third Party sensors, Spare parts

div.gif (3436 bytes)

Last modified: 01 Feb 2011

Sea-Bird Home     Phone: (+1) 425-643-9866     Fax: (+1) 425-643-9954    E-mail: seabird@seabird.com