Sea-Bird Electronics              Products            Support            Software            Sales            Service            Search/Sitemap

Spare Parts

This spare parts list includes our most commonly used/ordered spare parts and spare parts kits (see separate listings for cables, mount kits for Sea-Bird sensors, and mount kits for third party sensors).

The actual part number required is dependent on the specific instrument, because instrument options selected at the time of purchase affect the spare parts required and mechanical designs have changed over the years. To ensure that you are purchasing the correct parts, consult Sea-Bird with your instrument's serial number and information about your instrument configuration before placing an order. (Click here to see where to find the serial number on your instrument.)

The Sea-Bird part number is listed for each spare part or spare part kit; links are provided to drawings or documents for many spare parts kits.

Note: We do not publish prices on the website. Please contact us for pricing (seabird@seabird.com or 425-643-9866).

Click the instrument in the list below or scroll through the page to find the desired spares.

Links to other Sales pages:

 

SBE 3

23041  Zinc anode ring for end cap

 

SBE 4

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. (see Application Note 70)

50033  O-ring kit for SBE 4 (document 67067)

50246  O-ring kit for SBE 4 Quick Disconnect

23548  Zinc anode ring for end cap

 

SBE 5M, 5T, and 5P
Pump Housing

50062  Pump housing o-ring kit for SBE 5M (titanium or plastic housing), 5T, or 5P (document 67029)

23594  Pump end cap retainer

50391  Pump impeller replacement kit (includes impeller, o-rings, thrust washer; see Application Note 75: Maintenance of SBE 5T, 5P, and 5M Pumps))

23593  Pump impeller housing

Plumbing

23337  Air bleed valve, pump plumbing -- for profiling CTD deployed in vertical orientation

30387  1/2" nylon hose barb Y-fitting -- for profiling CTD deployed in vertical orientation

23557  Quick disconnect connector, inserts into conductivity cell

23555  Quick disconnect connector, for 1/2" diameter tubing, receives tubing

30385  Tygon tubing, 1/4" ID X 3/8" OD, 2 m -- part of conductivity cell filling/storage device PN 50087

30382  Tygon tubing, 1/4" ID X 5/16" OD, 2 m -- connects T duct to C duct

30388  Tygon tubing, 1/2" ID X 3/4" OD, 2 m -- main plumbing

31450  Tygon tubing, 1/2" ID X 3/4" OD, 2 m, Black -- main plumbing, use to minimize exposure to light

30384  Tygon tubing, 7/16" ID X 9/16" OD, 2 m -- cell soaker tubing for SBE 4

30579  Tygon tubing, 3/8" ID X 1/2" OD, 2 m -- fits over ends of SBE 43 plenum

 

SBE 7

23041  Zinc anode ring for end cap

 

SBE 8

23041  Zinc anode ring for end cap

 

SBE 9plus
90199  CTD plumbing kit (document 67022)

90088  CTD plumbing & TC duct tubing kit (document 67018)
Note: This kit includes flexible tubing for plumbing TC duct, but does not include TC duct. For TC duct parts, see 90085 below.

90085  TC duct & plumbing kit (document 67051)

50070  O-ring kit (document 67009)

50246  Conductivity disconnect fitting spare o-ring kit

50089  Jackscrew kit

50025  Pressure sensor oil refill kit (document 67066)

50024  Hardware kit for SBE 9plus with aluminum housing (document 67053)

50138  Hardware kit for SBE 9plus with titanium housing (document 67131)

varies  Conductivity cell tube support kit (document 67068)

50088  Seaspares kit for SBE 9plus with aluminum housing (hardware, o-rings, cables, dummy plugs, connectors, zinc anodes, fuses, etc.) (document 67025)

50139  Seaspares kit for SBE 9plus with titanium housing (hardware, o-rings, cables, dummy plugs, connectors, fuses, etc.) (document 67128)

50321  Seaspares kit for SBE 9plus with aluminum housing & wet-pluggable connectors  (hardware, o-rings, cables, dummy plugs, connectors, zinc anodes, fuses, etc.) (document 67129)

50322  Seaspares kit for SBE 9plus with titanium housing & wet-pluggable connectors (hardware, o-rings, cables, dummy plugs, connectors, fuses, etc.) (document 67130)

31634  Hardigg shipping case (AL4915-1105) (photo)

 

SBE 13 (no longer in production)
50002  O-ring kit for SBE 13 (3400 m) (document 67064)

50014  O-ring kit for SBE 13 (6800 m) (document 67012)

50017  Dissolved Oxygen module refurbishment kit for SBE 13B or 23B Beckman (document 67031)

 

SBE 16plus V2, 16plus-IM V2, and 16plus and 16plus-IM (no longer in production)

(Note: As of March 1, 2008, SBE 16plus and 16plus-IM are no longer in production, and are replaced by 16plus V2 and 16plus-IM V2.)

Batteries

801483   9D (10.8 V / 42 AH) lithium battery pack kit (document 67143) -- see notes below.

801479   3DD (10.8 V / 30 AH) lithium battery pack kit (document 67144) -- see notes below.

NOTES:
1. Batteries not included.
2. Lithium battery packs cannot be used with a 16plus, 16plus-IM, 16plus V2, or 16plus-IM V2 that is integrated with SBE 5T or 5P pump, because of current limitations. They can be used with an instrument with no pump, or with an SBE 5M pump.

Hardware, O-ring, & Mounting Kits

60021  Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50274  O-ring kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67102)

50273  Hardware kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67103)

90087  CTD plumbing kit (document 67108)

varies  Cable clamp kit for SBE 37-IM, 37-IMP, 16plus-IM, 16plus-IM V2, 44, or UIMM (document 67142)

50434  Seaspares kit for SBE 16plus V2 or 19plus V2 with standard connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67196) -- ONLY applicable to 16plus V2 or 19plus V2

50435  Seaspares kit for SBE 16plus V2 or 19plus V2 with wet-pluggable connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67197) -- ONLY applicable to 16plus V2 or 19plus V2

50276  Seaspares kit for SBE 16plus or 19plus with standard connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67104) -- NOT applicable to 16plus V2 or 19plus V2

50301  Seaspares kit for SBE 16plus or 19plus with wet-pluggable connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67116) -- NOT applicable to 16plus V2 or 19plus V2

50323  Seaspares kit for SBE 16plus-IM or 16plus-IM V2 with standard connectors (hardware, o-rings, dummy plugs, connectors, etc.) (document 67132)

50324  Seaspares kit for SBE 16plus-IM or 16plus-IM V2 with wet-pluggable connectors (hardware, o-rings, dummy plugs, connectors, etc.) (document 67133)

Miscellaneous

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

233186  High-head pressure port plug for muddy/biologically productive environments (for instrument with Druck pressure sensor) (Application Note 84)

 

SBE 16 (no longer in production)

801483   9D (10.8 V / 42 AH) lithium battery pack kit (document 67143) -- NOTE: batteries not included.

801479   3DD (10.8 V / 30 AH) lithium battery pack kit (document 67144) -- NOTE: batteries not included.

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. (see Application Note 70)

50012  O-ring kit for SBE 16 or 19 (document 67026)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

50082  Hardware kit for SBE 16 with titanium housing  (document 67081)

60021  Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

90087  CTD plumbing kit (document 67108)

50072  Support kit for SBE 16 or 19 (document 67017)

 

SBE 17plus
Batteries

801512  12 NiMH cells in rechargeable drop-in pack (14.4V/8Ah)

90504  NiMH battery charger for 6, 9, or 12 cells / 8 Ah D-cell packs. Provides full recharge in 2 hours, includes AC power cord & battery charging cable

801642  12 Ni-Cad cells in drop-in pack, 14.4V, 4.4 AH
(Note: As of January 2011, Sea-Bird does not manufacture the 90226 Ni-Cad battery charger, because parts are no longer available. We are still able to provide the battery pack, for customers who already have a charger.)

Hardware & O-ring Kits

50051  Small hardware & o-ring kit for SBE 17plus with aluminum housing (document 67014)

50140  Small hardware & o-ring kit for SBE 17plus with titanium housing (document 67125)

60021  Battery end cap for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

23155.1  Magnetic switch kit for SBE 17plus (drawing 20193 for switch; kit also includes 1 magnet)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

50105  Support kit for SBE 17plus with aluminum housing (hardware, o-rings, cable, dummy plugs, connectors, etc.) (document 67134)

50141  Support kit for SBE 17plus with titanium housing (hardware, o-rings, cable, dummy plugs, connectors, etc.) (document 67135)

50328  Support kit for SBE 17plus with aluminum housing & wet-pluggable connectors (hardware, o-rings, cable, dummy plugs, connectors, etc.) (document 67136)

50329  Support kit for SBE 17plus with titanium housing & wet-pluggable connectors (hardware, o-rings, cable, dummy plugs, connectors, etc.) (document 67137)

 

SBE 18

30459 Plastic soaker bottle for pH probe

50020  pH sensor O-ring kit

24023 pH probe for SBE 18, 22, 27, or 30 (document 67072)

23190C  pH electrode guard

25001  KCl soaker solution, 500 ml bottle

23041  Zinc anode ring for end cap

 

SBE 19plus V2 and 19plus (no longer in production)

(Note: As of March 1, 2008, SBE 19plus is no longer in production, and is replaced by 19plus V2.)

Batteries

801511  9 NiMH cells in rechargeable drop-in pack (10.8V/8 Ah)

90504  NiMH battery charger for 6, 9, or 12 cells / 8 Ah D-cell packs. Provides full recharge in 2 hours, includes AC power cord & battery charging cable

801641  9 Ni-Cad cells in drop-in rechargeable pack (10.8V/4.4 Ah)
(Note: As of January 2011, Sea-Bird does not manufacture the 90226 Ni-Cad battery charger, because parts are no longer available. We are still able to provide the battery pack, for customers who already have a charger.)

Hardware & O-ring Kits

41124  Battery cover/contact plate, replaces 80076.1

60021  Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50274  O-ring kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67102)

50273  Hardware kit for SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus, or 19plus V2 (document 67103)

50275  Magnetic switch kit for SBE 19plus or 19plus V2 (document 67101)

90087  CTD plumbing kit (document 67108)

50434  Seaspares kit for SBE 16plus V2 or 19plus V2 with standard connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67196) -- ONLY applicable to 16plus V2 or 19plus V2

50435  Seaspares kit for SBE 16plus V2 or 19plus V2 with wet-pluggable connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67197) -- ONLY applicable to 16plus V2 or 19plus V2

50276  Seaspares kit for SBE 16plus or 19plus (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67104) -- NOT applicable to 16plus V2 or 19plus V2

50301  Seaspares kit for SBE 16plus or 19plus with wet-pluggable connectors (hardware, o-rings, magnetic switch, cable, dummy plugs, connectors, etc.) (document 67116) -- NOT applicable to 16plus V2 or 19plus V2

Cages

801269 *  Stainless-steel protective cage, 40 inch (101 cm) tall (drawing 22009 and document 67171) -- for 19plus or 19plus V2 with standard strain-gauge pressure sensor

801270 *  Stainless-steel protective cage, 48 inch (123 cm) tall (drawing 22010 and document 67171) -- for 19plus V2 with optional Digiquartz pressure sensor

* Note: PN 801269 and 801270 cages do not fit inside SBE 32 Carousel extension stand, for mounting horizontally below Carousel. If mounting a 19plus or 19plus V2 (with strain gauge pressure sensor) in extension stand, use PN 23892 cage instead (drawing 20893); contact Sea-Bird for a 19plus V2 with Quartz pressure sensor.

232012  Stainless-steel protective cage with small footprint, for deploying through ice (drawing 22149 and photo)

Miscellaneous

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50288  Moored mode conversion kit for SBE 19plus or 19plus V2 (document 67114)

233186  High-head pressure port plug for muddy/biologically productive environments (for instrument with Druck pressure sensor, moored application) (Application Note 84)

31634  Hardigg shipping case (AL4915-1105), for SBE 19plus or 19plus V2 in cage (photo of 9plus in this shipping case)
Note: 19plus V2 with optional Digiquartz pressure sensor requires a longer cage (PN 801270) than 19plus V2 with standard strain-gauge pressure sensor. PN 801270 cage does not fit in this Hardigg shipping case; contact Sea-Bird to discuss purchasing a larger case.

 

SBE 19 (no longer in production)

50012  O-ring kit for SBE 16 or 19 (document 67026)

50009  O-ring kit for SBE 19 (document 67076)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

50249  Small hardware kit for SBE 19 (document 67015)

60021  Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50026  Magnetic switch kit for SBE 19 or 25 (document 67035)

50236  TC duct kit for SBE 19 (document 67088)

90087  CTD plumbing kit (document 67108)

50072  Support kit for SBE 16 or 19 (document 67017)

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. (see Application Note 70)

232012  Stainless-steel protective cage with small footprint, for deploying through ice (drawing 22149 and photo)

 

SBE 21

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. For SBE 21s shipped before October 2002. (see Application Note 70)

50106  Hardware & o-ring kit for SBE 21 (document 67021)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

50298  Support kit for SBE 21 compatible with SBE 38 remote temperature sensor (hardware, o-rings connectors, cell cleaning supplies, etc.) (document 67119)

50107  Support kit for SBE 21 compatible with SBE 3 remote temperature sensor (hardware, o-rings, connectors, cell cleaning supplies, etc.) (document 67060)

23388.2 SBE 21 top end cap blank (flow chamber seal when sensors removed)

90399.1  SBE 21 electronics/sensor assembly (SBE 38 interface)

90387.1  SBE 21 electronics/sensor assembly (SBE 3 interface)

23188.2  PVC water jacket/manifold assembly (no electronics or sensor housing)

 

SBE 22 (no longer in production)

24023 pH probe for SBE 18, 22, 27, or 30 (document 67072)

 

SBE 23 (no longer in production)
50017  Dissolved Oxygen module refurbishment kit for SBE 13B or 23B Beckman (document 67031)

 

SBE 25

Batteries

801511  9 NiMH cells in rechargeable drop-in pack (10.8V/8 Ah)

90504  NiMH battery charger for 6, 9, or 12 cells / 8 Ah D-cell packs. Provides full recharge in 2 hours, includes AC power cord & battery charging cable

801641  9 Ni-Cad cells in drop-in rechargeable pack (10.8V/4.4 Ah)
(Note: As of January 2011, Sea-Bird does not manufacture the 90226 Ni-Cad battery charger, because parts are no longer available. We are still able to provide the battery pack, for customers who already have a charger.)

Hardware & O-ring Kits

50069  Small hardware & o-ring kit for SBE 25 (document 67030)

60021  Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50026  Magnetic switch kit for SBE 19 or 25 (document 67035)

50246  Conductivity disconnect fitting spare o-ring kit

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

90199  CTD plumbing kit (document 67022)

90088  CTD plumbing & TC duct tubing kit (document 67018)

90085  TC duct & plumbing kit (document 67051)

50025  Pressure sensor oil refill kit (document 67066)

50332  Support kit for SBE 25 (hardware, o-rings, cables, connectors, dummy plugs, zinc anodes, etc.) (document 67127)

50331  Support kit for SBE 25 with wet-pluggable connectors (hardware, o-rings, cables, connectors, dummy plugs, zinc anodes, etc.) (document 67126)

Cage

23302C  SBE 25 stainless steel protective cage

Miscellaneous

31634  Hardigg shipping case (AL4915-1105) (photo of 9plus in this shipping case)

 

SBE 26plus and SBE 26 (no longer in production)

60021  Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

50056  Hardware kit for SBE 26/26plus, 53, or 54 (document 67016)

801483  9D (10.8 V / 42 AH) lithium battery pack kit (document 67143) for SBE 26 (not plus) -- NOTE: batteries not included.

801575  Battery Cover Spacer / Adapter, 12 D alkaline cells to 6 DD Electrochem Lithium cells

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit (for optional SBE 4 Conductivity Sensor) -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. (see Application Note 70)

 

SBE 27

24023 pH probe for SBE 18, 22, 27, or 30 (document 67072)

30459  Plastic soaker bottle for pH probe

50020  pH sensor O-ring kit

24023  pH electrode

23190C  pH electrode guard

25001  KCl soaker solution, 500 ml bottle

23041  Zinc anode ring for end cap

 

SBE 29

50025  Pressure sensor oil refill kit (document 67066)

23041  Zinc anode ring for end cap

 

SBE 30 (no longer in production)

24023 pH probe for SBE 18, 22, 27, or 30 (document 67072)

 

SBE 32 (32, 32C, and 32SC, as applicable)

Note: Full size SBE 32 comes in 2 frame sizes:
Small Frame -- 1-inch diameter for 12 place (through 12-liter bottle size) and 24 place (through 2.5-liter bottle size), and
Large Frame -- 1.375-inch diameter for 12 place (larger than 12-liter bottle size) and 24 place (larger than 2.5-liter bottle size)

50151  O-ring kit for SBE 32 (document 67050)

50113  Hardware kit for SBE 32 with small frame (document 67010)

50116  Hardware kit for SBE 32 with large frame (document 67086)

50142  Hardware kit for SBE 32C or 32SC (document 67011)

50195  Hardware kit for SBE 32SC (document 67046)

50130.1  Hardware kit for SBE 32C (document 67048)

50130  Hardware kit for SBE 32C or 32SC (document 67047)

50111  Lifting bail kit for SBE 32 with small frame, 32C, or 32SC (document 67033)

50133  O-ring & hardware kit for SBE 32 with aluminum pylon (for latches & pylon) (document 67023)

50279  O-ring & hardware kit for SBE 32 with titanium pylon (for latches & pylon) (document 67109)

50172  O-ring & hardware kit for SBE 32 (stainless steel) pylon  (document 67054)

50299  Titanium latch kit for SBE 32, 32C, or 32SC (document 67157) -- for 12-or 24-bottle Carousel

50428  Titanium latch kit for SBE 32 -- for 36-bottle Carousel (document 67157)

50211  Extension stand u-bolt kit for SBE 32 with small frame (document 67078)

50297  Deck pad assembly kit for SBE 32 with small frame (document 67117)

50296  Deck pad assembly kit for SBE 32 with large frame (document 67117)

50112  Frame assembly kit for SBE 32 with small frame (document 67049)

50115  Frame assembly kit for SBE 32 with large frame (document 67079)

50340  Complete hardware kit for SBE 32 with small frame (document 67139)

50341  Complete hardware kit for SBE 32 with large frame (document 67140)

50342  Complete hardware kit for SBE 32C or 32SC (document 67141)

50123  Tool kit for SBE 32, 32C, or 32SC (document 67099)

50439  Frame coating repair kit for SBE 32, 32C, or 32SC (application note 88)

50265  Single bottle lanyard replacement kit (5 Nico-press sleeves, 8 feet of monofilament line, 1 brass hook, 2 plastic lanyard balls)

50135  Bottle repair kit for OTE water sample bottle (includes o-ring kit, 2 end plugs, latex rubber power cord (0.9 m), drain valve, air vent, brass hook, Nicopress sleeves, monofilament (6 m), 2 polyethylene balls)

Trace Metals / Geotraces Carousels (consult Sea-Bird to verify appropriate kit for your Carousel)

50452  Hardware kit for trace metals Carousel with SBE 19plus V2 mounted vertically to Carousel frame (document 67210)

50436  Hardware kit for Geotraces Carousel with SBE 9plus mounted vertically below Carousel (document 67198)

 

SBE 35 and 35RT

50175  Fixed point cell bushing, spare (not for SBE 35RT)

23041  Zinc anode ring for end cap

 

SBE 37 (37-SMP-IDO, 37-SMP, 37-SM, 37-SIP-IDO, 37-SIP, 37-SI, 37-IMP-IDO, 37-IMP, 37-IM, as applicable)

Batteries [see notice about retrofit battery pack and Application Note 89]

50442     SBE 37 & 44 Red retrofit battery holder (PN 801797) and twelve AA lithium cells (PN 50441) for SBE 37 (SM, SMP, IM, IMP) and SBE 44

801797   Red retrofit battery holder (7V nominal, Version 1) for SBE 37 (SM, SMP, IM, IMP) and SBE 44, for use with twelve 3.6V AA lithium cells

801863   Yellow battery holder (14V nominal, Version 2) for SBE 37 IDO (SMP-IDO, IMP-IDO), for use with twelve 3.6V AA lithium cells

50441     SBE 37 and 44 lithium batteries, package of twelve 3.6V AA cells (Saft LS 14500)

Hardware & O-ring Kits

SMP-IDO

60056  Hardware & o-ring kit for SBE 37-SMP-IDO (document 67212)

SM & SMP

60023  Hardware & o-ring kit for SBE 37-SM or 37-IM (instruments delivered before December 1, 1999, with battery pack that requires knob to remove from instrument) (document 67032)

60023.1  Hardware & o-ring kit for SBE 37-SM or 37-IM (instruments delivered before December 1, 1999) (document 67063)

60033  Hardware & o-ring kit for SBE 37-IM, 37-IMP, or 44 (instruments delivered after December 1, 1999; compatible with obsolete 50243 batteries)  (document 67052)

60035  Hardware & o-ring kit for SBE 37-SM or 37-SMP (instruments delivered after December 1, 1999; compatible with obsolete 50243 batteries) (document 67092)

60049  Hardware & o-ring kit for SBE 37-SM or 37-SMP with titanium housing (instruments delivered after December 1, 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) (document 67201)

60053  Hardware & o-ring kit for SBE 37-SM or 37-SMP with plastic housing (instruments delivered after December 1, 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) (document 67206)

SIP-IDO

60060  Hardware & o-ring kit for SBE 37-SIP-IDO (document 67215)

SI & SIP

60024  Hardware & o-ring kit for SBE 37-SI (instruments delivered before December 1, 1999) (document 67083)

60034  Hardware & o-ring kit for SBE 37-SI or 37-SIP with titanium housing (instruments delivered after December 1, 1999) (document 67091)

60051  Hardware & o-ring kit for SBE 37-SI or 37-SIP with plastic housing (instruments delivered after December 1, 1999) (document 67204)

IMP-IDO

60055  Hardware & o-ring kit for SBE 37-IMP-IDO, with plastic housing (document 67209)

IM & IMP

60050  Hardware & o-ring kit for SBE 37-IM, 37-IMP, or 44 with titanium housing (instruments delivered after December 1, 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) (document 67202)

60054  Hardware & o-ring kit for SBE 37-IM, 37-IMP, or 44 with plastic housing (instruments delivered after December 1, 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) (document 67207)

Mount Kits

SM

50239  Welded-bolt cable clamp kit for SBE 37-SM (instruments delivered before December 1, 1999) (document 67034)

SM, SMP, SI, SIP

varies  Cable clamp kit for SBE 37-SMP, 37-SM, 37-SIP, or 37-SI (instruments delivered after December 1, 1999) (document 67094F)

50264  Through-bolt mount SBE 37-SMP, 37-SM, 37-SIP, or 37-SI (instruments delivered after December 1, 1999) (document 67096B)

SMP-IDO, SIP-IDO

varies  Cable clamp kit for SBE 37-SMP-IDO or 37-SIP-IDO (document 67094G)

50264  Through-bolt mount SBE 37-SMP-IDO or 37-SIP-IDO (document 67096C)

IM, IMP

varies  Cable clamp kit for SBE 37-IMP, 37-IM, 16plus-IM, 16plus-IM V2, 44, or UIMM (instruments delivered after December 1, 1999) (document 67142A)

IMP-IDO

varies  Cable clamp kit for SBE 37-IMP-IDO (document 67142B)

Miscellaneous

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

233186  High-head pressure port plug for muddy/biologically productive environments (not for IDO MicroCATs) (Application Note 84)

31632  Storm shipping case (iM2950) -- holds up to 4 MicroCATs of any type (not IDO) (photo)

TBD  Storm shipping case (iM2950) -- holds up to 3 IDO MicroCATs (SMP-IDO, SIP-IDO, IMP-IDO)

 

SBE 39

22074  SBE 39 lithium battery, UltraLife U9VL, 9V

varies  Cable clamp kit for SBE 39, for use with or without fairing/net fender (document 67162 & drawing 41396)

60042  Standard spares kit for SBE 39 with serial number > 3000 (document 67159)

60032  Standard spares kit for SBE 39 with serial number < 3000 (document 67028)

60032.1  Spares kit for SBE 39 with low pressure Paine pressure sensor (document 67085)

233186  High-head pressure port plug for muddy/biologically productive environments (for instrument with Druck pressure sensor) (Application Note 84)

31633  Storm shipping case (iM2600) -- holds up to 4 SBE 39s with external connectors or 6 SBE 39s with internal connectors (does not hold SBE 39s with net fenders) (photo of case with 6 SBE 39s with internal connectors)

 

SBE 39-IM

22095  SBE 39-IM lithium battery, 3.6V AA (R6), Saft LS 14500 (39-IM uses 2)

varies  Cable clamp & guide kit for SBE 39-IM (document 67161)

60043  Standard spares kit for 39-IM with serial numbers 3089 through 3100 (document 67163)

60044 Standard spares kit for 39-IM with serial numbers greater than 3100 (document 67167)

233186  High-head pressure port plug for muddy/biologically productive environments (Application Note 84)

31633  Storm shipping case (iM2600) -- holds up to 4 SBE 39-IMs (does not hold SBE 39-IMs with net fenders) (photo of case with 6 SBE 39s)

 

SBE 43

801617   SBE 43 Plenum Assembly, Version 2, Black Acetal

31450   Tygon tubing, 1/2" ID X 3/4" OD, 2 meters, Black

 

SBE 44

Batteries [see notice about retrofit battery pack and Application Note 89]

50442     SBE 37 & 44 retrofit battery holder (PN 801797) and twelve AA lithium cells (PN 50441)

801797   Retrofit battery holder for SBE 37 and SBE 44, for use with twelve 3.6V AA lithium cells

50441     SBE 37 and 44 lithium batteries, package of twelve 3.6V AA cells (Saft LS 14500)

Hardware, O-ring, & Mounting Kits

60033  Hardware & o-ring kit for SBE 37-IM, 37-IMP, or 44 (instruments delivered after December 1, 1999; compatible with obsolete 50243 batteries) (document 67052)

60050  Hardware & o-ring kit for SBE 37-IM, 37-IMP, or 44 with titanium housing (instruments delivered after December 1, 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) (document 67202)

60054  Hardware & o-ring kit for SBE 37-IM, 37-IMP, or 44 with plastic housing (instruments delivered after December 1, 1999; compatible with 50441 AA lithium batteries & 801797 retrofit battery holder) (document 67207)

varies  Cable clamp kit for SBE 37-IM, 37-IMP, 16plus-IM, 16plus-IM V2, 44, or UIMM (document 67142)

 

SBE 45

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

60036  Hardware & o-ring kit for SBE 45 (document 67095)

 

SBE 49
60037  Hardware & o-ring kit for SBE 49 with titanium housing (document 67111)

60052  Hardware & o-ring kit for SBE 49 with plastic housing (document 67205)

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50312  Anti-foulant device in-line cap/cup assembly for SBE 49 or 52-MP (document 67123)

233186  High-head pressure port plug for muddy/biologically productive environments (Application Note 84)

 

SBE 50

233186  High-head pressure port plug for muddy/biologically productive environments (Application Note 84)

 

SBE 52-MP

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50312  Anti-foulant device in-line cap/cup assembly for SBE 49 or 52-MP (document 67123)

233186  High-head pressure port plug for muddy/biologically productive environments (Application Note 84)

 

SBE 53

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

60021  Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50056  Hardware kit for SBE 26/26plus, 53, or 54 (document 67016)

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

50315  Anti-foul holder kit (for optional SBE 4 Conductivity Sensor) -- installs on SBE 4 & SEACATs (not SEACATplus) to allow use of AF24173 in place of obsolete 24012 Anti-Foulant Devices. Order AF24173 separately. (see Application Note 70)

801575  Battery Cover Spacer / Adapter, 12 D alkaline cells to 6 DD Electrochem Lithium cells

 

SBE 54

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26/26plus, 52-MP, 53, 54, AFM, or PDIM

60021  Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50056  Hardware kit for SBE 26/26plus, 53, or 54 (document 67016)

 

SBE 55

Frame & Electronics

60021  Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

50421  Frame assembly hardware kit for SBE 55

50429  Jackscrew kit for SBE 55

50422  SBE 55 Universal CTD / Electronics Installation Kit (document 67179)

Bottles & Bottle Hardware

801714  ECO 4-liter water sample bottle

50430  SBE 55 Bottle Mounting and Lanyard Kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67194)

50427  Bottle repair kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67185)

50424  Drain fitting kit for PN 801714 ECO 4-liter water sample bottle (document 67182)

50425  Air bleed kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67183)

50426  O-ring kit for PN 801714 ECO Sea-Bird 4-liter water sample bottle (document 67184)

50135  Bottle repair kit for OTE water sample bottle (includes o-ring kit, 2 end plugs, latex rubber power cord (0.9 m), drain valve, air vent, brass hook, Nicopress sleeves, monofilament (6 m), 2 polyethylene balls) -- Note: Several early production models of SBE 55 were sold with Ocean Test Equipment (OTE) bottles instead of PN 801714 ECO 4-liter bottles. This repair kit is only for OTE bottles.

 

SBE 56

60059  Spares kit for SBE 56 (includes o-rings & desiccant capsules)

 

Auto Fire Module (AFM)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26, 26plus, 52-MP, 53, 54, AFM, or PDIM

60021  Battery end cap hardware & o-ring kit for SBE 16/16plus/16plus-IM/16plus V2/16plus-IM V2, 17plus, 19/19plus/19plus V2, 25, 26/26plus, 53, 54, 55, or AFM (document 67042)

30044  Zinc anode, 1 inch diameter, for end caps

 

Glider Payload CTD (GPCTD)

801542  AF24173 Anti-Foulant Device (pair, bagged, labeled for shipping)

 

Power and Data Interface Module (PDIM)

50092  Jackscrew kit for SBE 16, 17plus, 19, 21, 25, 26, 26plus, 52-MP, 53, 54, AFM, or PDIM

30044  Zinc anode, 1 inch diameter, for end caps

 

Underwater Inductive Modem Module (UIMM)

varies  Cable clamp kit for SBE 37-IM, 37-IMP, 16plus-IM, 16plus-IM V2, 44, or UIMM (document 67142)

 

Miscellaneous
50006  Hardware kit for Battlespace Jr Profiler (document 67037)

50087  Conductivity cell filling & storage kit (document 67043)

50025  Pressure sensor oil refill kit (document 67066)

30411  Triton X-100, 500 ml

Kits are subject to change without notice.

Last modified: 08-Apr-2011

Sea-Bird Home     Phone: (+1) 425-643-9866     Fax: (+1) 425-643-9954     E-mail: seabird@seabird.com