Brochure/specifications
Note: We do not publish prices on the website. Please contact us [seabird@seabird.com
or (+1) 425-643-9866] for pricing.
| Part # | Description | Notes | |
| 4C | CTD CONDUCTIVITY SENSOR - modular sensor (square wave output & isolated electronics), range 0 - 7 S/m, used with pumped CTDs. Includes complete documentation. Specify: housing (depth rating) selection. |
SBE 4C is shipped with Tygon tubing looped end-to-end around conductivity cell, to prevent dust & dirt from entering cell. SBE 4C is shipped dry to prevent conductivity cell damage from freezing. See SBE 4M for conductivity sensor without Quick disconnect. |
|
| SBE 4C Housing (depth rating) Selections -- MUST SELECT ONE | |||
| 4C-1 | Aluminum housing, 6800 m depth rating |
|
|
| 4C-2 | Titanium housing, 10,500 m depth rating | ||
| SBE 4C Wet-Pluggable Connector Option | |||
| 4C-3 | Wet-pluggable (MCBH) connector instead of Standard (XSG) connector |
 Wet-pluggable connectors may be mated in wet conditions. Their pins do not need to be dried before mating. By design, water on connector pins is forced out as connector is mated. However, they must not be mated or un-mated while submerged. Wet-pluggable connectors have a non-conducting guide pin to assist pin alignment & require less force to mate, making them easier to mate reliably under dark or cold conditions, compared to our standard (Impulse XSG/RMG) connectors. Like standard connectors, wet-pluggables need proper lubrication & require care during use to avoid trapping water in sockets. |
|
Product configuration options listing for all products
Additional cables, mount kits, and spares may be found at: Cables, Mount kits for Sea-Bird sensors, Mount kits for Third Party sensors, Spare parts
Last modified: 05 May 2010
Sea-Bird Home Phone: (+1) 425-643-9866 Fax: (+1) 425-643-9954 E-mail: seabird@seabird.com
