SBE 37-IMP MicroCAT C-T (P optional) Recorder
Photo Gallery

Overall view, with Plastic ShallowCAT housing (titanium housing available) -- modem end cap, mounting brackets, conductivity cell, thermistor, and anti-foulant devices

Conductivity cell guard, Thermistor, Anti-Foulant devices

Conductivity cell guard, intake/exhaust protective label (remove label for deployment)

 

Optional Pressure sensor (with clamp removed)

 

Modem end cap and cable mounting guide, opening housing to remove batteries

 

Modem end cap,
battery pack assembly

Battery pack -- twelve 3.6-volt AA lithium batteries, Saft LS14500 (Note: battery pack has yellow cover plate; battery pack with red cover plate cannot be used in newer 37-IMP)

SBE 37-IMP and Surface Inductive Modem (SIM) -- lab setup for testing
(Note: Photo shows 37-IM, not 37-IMP, but setup is the same.)

Optional Storm plastic shipping case with custom foam inserts --
holds up to 4 MicroCATs (except IDO or ODO)

Overall view -- modem end cap, mounting brackets, conductivity cell, thermistor, and anti-foulant device cup

Overall view, with Plastic housing option (ShallowCAT) -- modem end cap, mounting brackets, conductivity cell, thermistor, and anti-foulant device cup

Overall view -- with custom clamps for large diameter mooring cable

Conductivity cell guard, Conductivity cell, Thermistor, Anti-Foulant device cup and plugs

Conductivity cell guard, Conductivity Cell, and Thermistor

Conductivity cell guard, Anti-Foulant device cup, and Anti-Foulant device caps

Optional Pressure sensor, Thermistor, Conductivity cell, and Pump exhaust  (with conductivity cell guard removed)

Modem end cap and mounting bracket, opening housing to remove batteries

Modem end cap,
battery pack assembly

Battery pack -- twelve 3.6-volt AA lithium batteries, Saft LS14500 (Note: replaced old battery pack in 2008)

SBE 37-IMP and Surface Inductive Modem (SIM) -- lab setup for testing
(Note: Photo shows 37-IM, not 37-IMP, but setup is the same.)

Optional Storm plastic shipping case with custom foam inserts --
holds up to 4 MicroCATs  (except IDO or ODO)