Sea-Bird Electronics            Products            Support            Software            Sales            Service            Search/Sitemap

MicroCAT C-T (P optional) Recorder
SBE 37-IMP (Inductive Modem & integral Pump)

[HRule Image]

Print version     Current manual (older manuals)     Reference Sheet     Configuration options & accessories

Intended for deployment in orientation shown (sensors at top) for proper operation SBE 37 MicroCAT CTD Recorder with Inductive Modem
 Plastic housing; titanium housing also available

SUMMARY

DESCRIPTION

The SBE 37-IMP MicroCAT is a high-accuracy conductivity and temperature (pressure optional) recorder with internal battery, non-volatile memory, built-in Inductive Modem, and Integral Pump. Calibration coefficients are stored in EEPROM, allowing output of C, T, P, and time in ASCII engineering units (decimal or XML; raw output available).

The Inductive Modem (IM) system provides reliable, low-cost, real-time data transmission for up to 100 IM-enabled instruments using plastic-coated wire rope (typically 3 x 19 galvanized steel) as both the transmission line and mooring tension member. IM instruments clamp anywhere along the rugged mooring wire. Expensive and potentially unreliable multi-conductor electrical cables with fixed position underwater connectors are not required. IM moorings are easily reconfigured for changing deployments (positions changed or instruments added or removed), by sliding and re-clamping instruments on the cable. IM systems are much less expensive and more power-efficient than acoustic modems, and offer reliable communication over greater distances.

In a typical mooring, an Inductive Modem Module (IMM) or Surface Inductive Modem (SIM) housed in the buoy communicates with underwater IM instruments and is interfaced to a computer or data logger via an RS-232 serial port. The computer or data logger (not supplied by Sea-Bird) is programmed to poll each IM instrument on the mooring for its data, and send the data to a telemetry transmitter (satellite link, cell phone, RF modem, etc.). The MicroCAT saves data in memory for upload after recovery, providing a data backup if real-time telemetry is interrupted.

SENSORS

The MicroCAT retains the temperature and conductivity sensors used in our time-proven SeaCAT and SeaCATplus. Our unique internal-field conductivity cell permits the use of expendable anti-foulant devices. The aged and pressure-protected thermistor has a long history of exceptional accuracy and stability.

The optional strain-gauge pressure sensor is available in eight ranges, to a maximum depth of 7000 meters. Compensation of the temperature influence on pressure offset and scale is performed by the MicroCAT’s CPU.

PUMP

The integral pump runs for 1 second each time the MicroCAT samples, providing the following advantages:

OPERATING MODES

User-selectable operating modes include:

SOFTWARE

The MicroCAT is supplied with a powerful Windows software package, Seasoft© V2, which includes:

DATA STORAGE AND BATTERY ENDURANCE

Temperature and conductivity are stored 6 bytes/sample, time 4 bytes/sample, and optional pressure 5 bytes/sample; memory capacity is in excess of 530,000 samples. The MicroCAT is powered by a 7.8 Amp-hour (nominal) battery pack consisting of twelve AA lithium cells (Saft LS14500) which, when removed from the MicroCAT, can be shipped via commercial aircraft. The pack provides sufficient internal battery capacity for more than 340,000 samples for a typical sampling scheme.

SPECIFICATIONS

  Measurement
Range		 Initial
Accuracy		 Typical
Stability		 Resolution
Conductivity 0 to 7 S/m
(0 to 70 mS/cm)		 ± 0.0003 S/m 
(0.003 mS/cm)		 0.0003 S/m
(0.003 mS/cm)
per month		 0.00001 S/m
(0.0001 mS/cm)
Temperature
 (°C)		 -5 to 45 ± 0.002 (-5 to 35 °C);
± 0.01 (35 to 45 °C)		 0.0002 per month 0.0001
Optional Pressure 20 / 100 / 350 / 600 / 1000 / 2000 / 3500 / 7000 m
(meters of deployment depth capability)		 ± 0.1% of full scale range 0.05% of full scale range per year 0.002% of full scale range
         

Clock Stability: 5 sec/month

Power Supply: 7.8 Amp-hour (nominal) battery pack

Quiescent Current: 55 microAmps

Communications Current: 0.6 milliAmps listening, 10 milliAmps transmitting

Communications Time: 0.5 sec/sample

Sampling Current: 8 milliAmps

Sampling Time: 1.9 - 2.6 sec/sample, dependent on sampling mode and inclusion of pressure sensor

Pump Current: 0.025 Amp-sec/sample

Housing, Depth Rating, and Weight:

Housing Material Depth Rating Weight
(with standard mounting clamp and guide)
Plastic 350 m (1150 ft) 3.6 kg (8.0 lbs) in air
1.7 kg (3.7 lbs) in water
Titanium 7000 m (23,000 feet)  
     

ADDITIONAL INFORMATION / LINKS:

Documentation -- manual, photos, technical papers, application notes, etc.

Sales Information -- options, accessories, cables, mount kits, spares, etc.

Software -- components of Seasoft V2

Links to Other Instruments of Interest

[HRule Image]  

Specifications are subject to change without notice.

Sea-Bird Home     Phone: (+1) 425-643-9866     E-mail: seabird@seabird.com