Brochure/specifications
Note: We do not publish prices on the website. Please contact us [seabird@seabird.com
or (+1) 425-643-9866] for pricing.
| Part # | Description | Notes | |
| 4C | CTD CONDUCTIVITY SENSOR - modular sensor (square wave output & isolated electronics), range 0 - 7 S/m, used with pumped CTDs. Includes complete documentation. Specify: housing (depth rating) selection. |
SBE 4C is shipped with Tygon tubing looped end-to-end around conductivity cell, to prevent dust & dirt from entering cell. SBE 4C is shipped dry to prevent conductivity cell damage from freezing. See SBE 4M for conductivity sensor without Quick disconnect. |
|
| SBE 4C Housing (depth rating) Selections -- MUST SELECT ONE | |||
| 4C-1 | Aluminum housing, 6800 m depth rating |
|
|
| 4C-2 | Titanium housing, 10,500 m depth rating | ||
| SBE 4C Wet-Pluggable Connector Option | |||
| 4C-3 | Wet-pluggable (MCBH) connector instead of Standard (XSG) connector |
 Wet-pluggable connectors may be mated in wet conditions. Their pins do not need to be dried before mating. By design, water on connector pins is forced out as connector is mated. However, they must not be mated or un-mated while submerged. Wet-pluggable connectors have a non-conducting guide pin to assist pin alignment & require less force to mate, making them easier to mate reliably under dark or cold conditions, compared to our standard (Impulse XSG/RMG) connectors. Like standard connectors, wet-pluggables need proper lubrication & require care during use to avoid trapping water in sockets. |
|
| SBE 4C Spares & Accessories | |||
| 17086 | SBE 4 (Cond) or SBE 3 (Temp) to SBE 9plus/25 interface cable, 0.63 m (DN 30566) | Cable for connecting SBE 3plus or 3F Temperature Sensor or SBE 4C Conductivity Sensor to SBE 9plus, 25, or 25plus CTD. Connector type (standard) must match sensor and CTD. For cable with wet-pluggable connectors, order PN 171669 (DN 32671) instead | |
| 50083.1 | Aluminum TC Sensor Mounting Kit for SBE 9plus | For mounting SBE 3plus or 3F Temperature Sensor and SBE 4C Conductivity Sensor on SBE 9plus, 25, or 25plus CTD. | |
| 90085 | TC duct & plumbing kit for user installation (includes documentation) | See Application Note 15: TC Duct Assembly and Plumbing Installation for details. | |
| 23557 | Quick disconnect connector, for 7/16" diameter tubing (connects to conductivity cell) |
 23557
mounts to tube fitting & connects to end of SBE 4C conductivity cell. When
used with 23555 (below), provides quick disconnect for removing
plumbing from conductivity cell (used on SBE
9plus, 25, or 25plus CTD). |
|
| 23555 | Quick disconnect connector, for 1/2" diameter tubing (inserts into Tygon tubing) |
 23555
snaps onto 23557 & attaches to Tygon tube plumbing,
providing quick disconnect for removing plumbing from
SBE 4C conductivity cell (used on SBE
9plus, 25, or 25plus CTD). |
|
Product configuration options listing for all products
Additional cables, mount kits, and spares may be found at: Cables, Mount kits for Sea-Bird sensors, Mount kits for Third Party sensors, Spare parts
Sea-Bird Home Phone: (+1) 425-643-9866 Fax: (+1) 425-643-9954 E-mail: seabird@seabird.com
