Sea-Bird Electronics            Products            Support            Software            Sales            Service            Search/Sitemap

SBE 63 Optical Dissolved Oxygen Sensor
Configuration Details

div.gif (3429 bytes)

Brochure/specifications       Manual

Note: We do not publish prices on the website. Please contact us [seabird@seabird.com or (+1) 425-643-9866] for pricing.

Part # Description Notes
63 OPTICAL DISSOLVED OXYGEN SENSOR - Sea-Bird optical sensor for pumped CTD applications, RS-232 temperature-compensated oxygen signal. Includes plenum & complete documentation. Specify: housing selection.
SBE 63 Housing Selections -- MUST SELECT ONE
63-1c 600 m plastic housing

SBE 63 is available in plastic (600 m) or titanium (7000 m) housing.

63-1a 7000 m titanium housing  
SBE 63 Spares & Accessories
50510 SBE 63 sensor mount kit/flow chamber for SeaCATs, Standard XSG connector Use for mounting SBE 63 to SBE 16plus V2, 16plus-IM V2, or 19plus V2 SeaCAT. Kit includes sensor mount (802296 with XSG connector or 802297 with MCBH connector), clamp, & tape.

Note: SBE 63s manufactured prior to April 2013 had a different hardware configuration, and required a different sensor mount (802096 with standard XSG connector, 802127 with wet-pluggable MCBH connector). If ordering a mount for an SBE 63 purchased previously, provide SBE 63 serial number so we can verify correct sensor mount.
50511 SBE 63 sensor mount kit/flow chamber for SeaCATs, Wet-pluggable MCBH connector
17088 SBE 63 interface cable, Standard XSG connectors, 1.1 m (DN 30567) This interface cable is compatible with SBE 16plus V2, 16plus-IM V2, 19plus, or 19plus V2, if connecting just SBE 63 to bulkhead connector on CTD. If connecting 2 sensors to 1 bulkhead connector, a Y-cable is required in place of one of these straight cables.
171792 SBE 63 interface cable, Wet-pluggable MCIL connectors (DN 32810)
90087 Universal plumbing kit (includes pump air release valve, Y-fitting, and tubing) -- Application note 64-1 Application Note 64-1 details installation of plumbing for SBE 43 & pump on a CTD (details for SBE 63 are similar).
31450 Tygon tubing, 1/2" ID X 3/4" OD, 2 m, Black -- main plumbing, minimizes light exposure

30388 tubing shown with SBE 9plus
30388 is main plumbing, attaches to pump, conductivity sensor, 1/2" nylon hose barb Y-fitting, etc.

31450 is main plumbing, attaches to pump, conductivity sensor, 1/2" nylon hose barb Y-fitting, etc. It is recommended in place of 30388 plumbing tubing (shown in photo) to minimize exposure to light, improving resistance to bio-fouling for moored applications. Beginning in January 2007, Sea-Bird used this black tubing on all new moored instruments (SBE 16plus/16plus V2 and 16plus-IM/16plus-IM V2 CTDs). If desired, customers may field retrofit plumbing on existing systems.

 

Product configuration options listing for all products

Additional cables, mount kits, and spares may be found at: Cables, Mount kits for Sea-Bird sensors, Mount kits for Third Party sensors, Spare parts

div.gif (3436 bytes)

Sea-Bird Home     Phone: (+1) 425-643-9866     Fax: (+1) 425-643-9954     E-mail: seabird@seabird.com