SEASOFT V2: SeatermAF

Software brochure in pdf format  |  Revision History  |  Software download instructions  |  Go to FTP site  |  Software FAQs

SeatermAF^© is part of our SEASOFT V2 software suite. SeatermAF is a terminal program for interfacing with Sea-Bird instruments that include Auto-Fire capability for operating a water sampler autonomously on non-conducting cable:

• SBE 17plus V2 SEARAM used with a SBE 32 Carousel Water Sampler and an SBE 9plus CTD
• Carousel Auto Fire Module (AFM) used with a SBE 32 Carousel Water Sampler and an SBE 19 (older product), 19plus (older product), or 19plus V2 SEACAT Profiler CTD, SBE 25 SEALOGGER CTD, SBE 50 Digital Oceanographic Pressure Sensor, or with no CTD
• SBE 55 ECO Water Sampler (which has built-in auto fire capability) used with an SBE 19 (older product), 19plus (older product), or 19plus V2 SEACAT Profiler CTD, SBE 25 SEALOGGER CTD, SBE 50 Digital Oceanographic Pressure Sensor, or with no CTD

SeatermAF can send commands to an instrument to provide status display, data acquisition setup, data retrieval, and diagnostic tests. Data uploaded with SeatermAF can typically be processed with the post-processing software in SEASOFT V2 (SBE Data Processing).

There is no manual for SeatermAF, but its use is covered in the instrument manuals (17plus V2, AFM, and SBE 55) and in SeatermAF's Help menu.

SeatermAF was written for use on systems running Win 95/98/NT/2000/XP; testing using Windows Vista and Windows 7 (32-bit) has not shown any compatibility problems.

If you discover reproducible bugs in SeatermAF, please document the steps taken to achieve them and send a report to Dave Murphy via e-mail (dmurphy@seabird.com) or Fax (425-643-9954). We welcome any suggestions for new features and enhancements.

Note:

The SEASOFT V2 software suite also includes the following Windows programs:

• Deployment Endurance Calculator -- calculator for determining deployment length for moored instruments.
• SeatermV2 -- terminal program that interfaces with SBE 16plus V2, 16plus-IM V2, 19plus V2, 37 (firmware 3.0 and higher), 54, and 90588.
• Seaterm  -- terminal program that interfaces with most instruments, providing setup, data retrieval, and diagnostic tests.
• Seasave V7  -- data acquisition program that acquires, converts, and displays real-time or archived raw data.
  Note: As of March 2007, Seasave V7 replaces Seasave-Win32.
• SBE Data Processing -- data processing program that converts, edits, processes, and plots data.
• Plot39 -- plotting program for data uploaded from the SBE 39 or 39-IM.

Also, see SEASOFT for Waves - Win32 -- for use with SBE 26, 26plus, or 53.

Last updated: 23 Feb 2011

Sea-Bird Home     Phone: (+1) 425-643-9866     Fax: (+1) 425-643-9954     E-mail: seabird@seabird.com