Brochure/specifications
Note: We do not publish prices on the website. Please contact us [seabird@seabird.com
or (+1) 425-643-9866] for pricing.
| Part # | Description | Notes |
| 5P | Plastic Submersible Pump - Constant speed, centrifugal impeller, DC brushless motor, 600 m plastic housing. Includes complete documentation. Configuration options are application dependent. CONSULT FACTORY to Specify: Voltage/Power & RPM selections. |
 SBE
5P is standard pump supplied with plastic SBE
25 or 25plus CTD to provide
pumped conductivity; also provides for other pumped sensors --
dissolved oxygen, etc. SBE 5P is supplied optionally with
16plus V2,
16plus-IM V2, or
19plus V2 if system includes
dissolved oxygen &/or other pumped sensors.
|
| SBE 5P Wet-Pluggable Connector Option | ||
| 5P-1 | Wet-pluggable (MCBH) connector instead of Standard (XSG) connector |
 Wet-pluggable connectors may be mated in wet conditions. Their pins do not need to be dried before mating. By design, water on connector pins is forced out as connector is mated. However, they must not be mated or un-mated while submerged. Wet-pluggable connectors have a non-conducting guide pin to assist pin alignment & require less force to mate, making them easier to mate reliably under dark or cold conditions, compared to our standard (Impulse XSG/RMG) connectors. Like standard connectors, wet-pluggables need proper lubrication & require care during use to avoid trapping water in sockets. |
| SBE 5P Pump Spares & Accessories -- see listing for SBE 5M (For cables to connect SBE 5P to Sea-Bird CTD, see CTD listing -- SBE 16plus V2, 16plus-IM V2, 19plus V2, 25plus.) | ||
Product configuration options listing for all products
Additional cables, mount kits, and spares may be found at: Cables, Mount kits for Sea-Bird sensors, Mount kits for Third Party sensors, Spare parts
Sea-Bird Home Phone: (+1) 425-643-9866 Fax: (+1) 425-643-9954 E-mail: seabird@seabird.com