SBE 5T Titanium Submersible Pump
Configuration Details

SBE 5T is standard pump supplied with SBE 9plus CTD or aluminum SBE 25 or 25plus CTD to provide pumped conductivity; also provides for other pumped sensors --  dissolved oxygen, etc. SBE 5T is supplied optionally with 16plus V2, 16plus-IM V2, or 19plus V2 if system includes dissolved oxygen &/or other pumped sensors.

• For pump with 600 m plastic housing & with same operational characteristics, order SBE 5P instead (standard pump supplied with plastic SBE 25 or 25plus CTD; optional pump supplied with plastic SBE 16plus V2, 16plus-IM V2, or 19plus V2 if system includes auxiliary pumped sensor(s)).
• For use on 16plus V2, 16plus-IM V2, or 19plus V2 if system does not include any auxiliary pumped sensors, order less powerful SBE 5M instead (available in titanium or plastic housing).

Standard connector (Impulse XSG)

Wet-pluggable connector (MCBH)

Wet-pluggable connectors may be mated in wet conditions. Their pins do not need to be dried before mating. By design, water on connector pins is forced out as connector is mated. However, they must not be mated or un-mated while submerged. Wet-pluggable connectors have a non-conducting guide pin to assist pin alignment & require less force to mate, making them easier to mate reliably under dark or cold conditions, compared to our standard (Impulse XSG/RMG) connectors. Like standard connectors, wet-pluggables need proper lubrication & require care during use to avoid trapping water in sockets.