SBE 33 Carousel Deck Unit
Configuration Details

SBE 33 also provides real-time data acquisition & water sampler control for SBE 19, 19plus, 19plus V2, 25, 25plus, or 49 CTD with SBE 55 ECO Water Sampler, or water sampler control for ECO without CTD. 

Notes: 

• Optional auxiliary sensors on CTDs not shown.
• Computer, slip-ring-equipped winch, conductive cable, & NMEA 0183 navigation device not supplied by Sea-Bird.
• PAR data is appended to CTD data stream in SBE 33, & passed to computer for storage &/or display with CTD data. SBE 33 supplies 12 volts to power sensor. See Third Party portion of price list to order surface PAR sensor; see SBE 33 Spares & Accessories below to order cable.
• Seasave version 7.19 or later also supports acquisition of data from a NMEA device connected directly to computer (instead of SBE 33 deck unit) for all CTDs shown.

PDIM housing is anodized aluminum, & is rated to 6800 m. PDIM order includes sea cable extension cable & pigtail cable, dummy plugs, & jackscrew kit. To order PDIM mount kit & CTD interface cable, see SBE 36 Accessories & Spares.

PDIM connector type (standard or wet-pluggable) must match CTD connector type. Wet-pluggable connectors provide easy connectability in damp (e.g., rolling, slippery deck) or cold environments (standard connectors may not seal well in extreme cold; we recommend connecting cables in warm ship’s lab rather than on deck for these conditions). Wet-pluggable connectors are not meant for literally plugging cables in submerged underwater; both our standard connectors & wet-pluggable connectors must be mated in air.

Test cable, 11/33/36 deck unit to 9/32/PDIM, Wet-pluggable, 10 m (DN 32695)