Brochure/specifications
Manual
Reference Sheet
Note: We do not publish prices on the website. Please contact us [seabird@seabird.com
or (+1) 425-643-9866] for pricing.
| Part # | Description | Notes | |||
| 38 | DIGITAL OCEANOGRAPHIC THERMOMETER - Standard measurement range (-5 to +35 C), certified stability of 0.001 C in six months. Includes 10,500 m titanium housing, real-time RS-232C or RS-485 interface, 2.4 m data I/O cable (801376), Seasoft software, & complete documentation. Specify: serial interface selection. | SBE 38 has no memory or internal
batteries. SBE 38 is frequently integrated as a remote temperature sensor with an SBE 21 or 45 thermosalinograph, to provide sea surface temperature. It can also be integrated as a secondary temperature sensor with an SBE 16plus, 16plus-IM, 16plus V2, 16plus-IM V2, 19plus V2, or 25plus CTD. Photos of standard shipment.
|
|||
| SBE 38 Serial Interface Selections -- MUST SELECT ONE | |||||
| 38-1 | RS-232C serial interface |
Sea-Bird supplies SBE 38 wired to match selected serial
interface option. However, SBE 38 can be user-configured for other
serial interface by modifying wiring from SBE 38’s bulkhead connector
to PCB & reprogramming SBE 38 to match wired configuration. Two-wire, RS-485 interface provides communication with individual SBE 38 or with all SBE 38s attached to RS-485 interface. This allows for coordination of sampling among many instruments. However, note that half-duplex communication is one-direction at a time (i.e., you cannot send commands & receive data at same time). |
|||
| 38-2 | RS-485 (half duplex ONLY) serial interface | ||||
| SBE 38 Wet-Pluggable Connector Option | |||||
| 38-4 | Wet-pluggable (MCBH) connectors instead of Standard (XSG & RMG) connectors on instrument & data I/O cable |
Wet-pluggable connectors may be mated in wet conditions. Their pins do not need to be dried before mating. By design, water on connector pins is forced out as connector is mated. However, they must not be mated or un-mated while submerged. Wet-pluggable connectors have a non-conducting guide pin to assist pin alignment & require less force to mate, making them easier to mate reliably under dark or cold conditions, compared to our standard (Impulse XSG/RMG) connectors. Like standard connectors, wet-pluggables need proper lubrication & require care during use to avoid trapping water in sockets. |
|||
| SBE 38 Spares & Accessories | |||||
| 801385 | Data/Power interface cable, RMG-4FS to DB-9S & red/black twisted wire leads, 2.4 m (DN 32277) |
801376 is included with standard shipment; listing
here is spare.
801385 & 801355 have twisted wire leads in place of battery snap, & can be used in place of 801376. |
|||
| 801376 | Data/Power interface cable, RMG-4FS to DB-9S & 9V battery snap, 2.4 m (DN 32604) | ||||
| 801355 | Data/Power interface cable, RMG-4FS to DB-9S & red/black twisted wire leads, 20 m (DN 32277) | ||||
| 801206 | Data/Power interface cable, Wet-Pluggable, MCIL-4FS to DB-9S & red/black twisted wire leads, 2.4 m (DN 32366) |
801263 included with standard shipment if 38-4
(wet-pluggable connector) specified; listing here is spare. 801206 & 801476 have twisted wire leads in place of battery snap, & can be used in place of 801263. |
|||
| 801263 | Data/Power interface cable, Wet-Pluggable, MCIL-4FS to DB-9S & 9V battery snap connector, 2.4 m (DN 32490) | ||||
| 801476 | Data/Power interface cable, Wet-Pluggable, MCIL-4FS to DB-9S & red/black twisted wire leads, 25 m (DN 32366) | ||||
| 17031 | 4-pin pigtail cable, RMG-4FS with lock sleeve, 2.4 m (DN 30581) | For applications where not connecting directly to computer. | |||
| 20200 | USB to Serial Port Adapter, FTDI UC232R-10 (connects computers with USB ports to RS-232 instruments) | Many newer PCs & laptop computers have USB port(s) instead of RS-232 serial port(s). USB serial adapter plugs into USB port, & allows a serial device to be connected through adapter. Multi-port adapters are available from other companies; see Application Note 68. | |||
Product configuration options listing for all products
Additional cables, mount kits, and spares may be found at: Cables, Mount kits for Sea-Bird sensors, Mount kits for Third Party sensors, Spare parts
Sea-Bird Home Phone: (+1) 425-643-9866 Fax: (+1) 425-643-9954 E-mail: seabird@seabird.com
