Print version
Current manual (for older manuals,
click here)
Configuration options & accessories
|
|
The SBE 26plus SEAGAUGE is the next generation wave and tide recorder, bringing improvements in many areas over its SBE 26 predecessor:
The 26plus combines Sea-Bird's non-volatile FLASH memory with a stable time base, precision thermometer, and Quartz crystal pressure sensor to provide wave and tide recording of unprecedented resolution and accuracy, along with high-quality temperature information. A second input connector for an optional SBE 4M conductivity sensor is also standard.
The 26plus integrates pressure samples to obtain water level measurements unaffected by wave action, and also independently burst-samples pressure at rates up to 4 Hz for wave amplitude calculation. Water level sampling interval and integration duration and wave burst sampling interval and duration are programmable. The tide interval is user-programmable over a range of 1 minute to 12 hours. The 26plus can continuously measure pressure (if equipped with Quartz pressure sensor), or can conserve battery power by removing power from the pressure sensor between tide measurements, with user-programmable pressure integration from 10 seconds to the entire tide interval. Temperature data is recorded with each tide integration. Waves are characterized by burst sampling with the number of samples per burst, burst interval, and burst integration time programmed by the user. A tide and temperature measurement consists of 9 bytes (12 bytes with optional conductivity); each sample in a wave burst uses 3 bytes.
The large memory and low power requirements permit frequent water level recording and highly detailed wave characterization. For example, with Quartz pressure sensor, standard alkaline batteries, and optional conductivity sensor, a 445-day deployment could include water level measurements every 30 minutes (integrating pressure for the entire 30 minutes) and an 8.5-minute, 4 Hz wave-burst (2048 samples) eight times a day; a 670-day deployment could be achieved if pressure integration is limited to 11 minutes for each water level measurement.
CONFIGURATION AND OPTIONS
A standard SBE 26plus is supplied with:
Options include:
SOFTWARE
The SBE 26plus includes SEASOFT© for Waves, a comprehensive package of Windows programs including deployment planning, instrument setup and data retrieval, plotting, auto-spectrum and time series analysis, and statistics reporting.
Auto-spectrum plot of surface wind waves obtained from one burst sample of 1024
pressure measurements. Error bars correspond to 90% confidence intervals.
SPECIFICATIONS
|
Quartz Pressure (standard) |
Strain Gauge Pressure (optional) |
Temperature
(°C) (standard) |
High Accuracy Temperature
(°C) (optional) |
Conductivity (S/m) (optional) |
|
| Measurement Range |
9 ranges, from 0 - 0.2 m (15 psia) to 0 - 680 m (1000 psia) |
4 ranges, from 0 - 20 m (45 psia) to 0 - 600 m (880 psia) |
-5 to +35 | -5 to +35 | 0 to 7 |
| Accuracy |
0.01% of full scale (3 mm for 45 psia range ¹) |
0.1% of full scale (30 mm for 45 psia range ¹) |
0.01 | 0.002 | 0.001 |
| Resolution |
Tide: 0.2 mm (0.008 in.) for 1-minute integration; 0.01 mm (0.0004 in.) for 15-minute integration ¹ |
Tide: 0.2 mm (0.008 in.) for 1-minute integration; 0.01 mm (0.0004 in.) for 15-minute integration ¹ |
0.001 | 0.0001 | 0.00002 |
|
Wave: 0.4 mm (0.016 in.) for 0.25-second integration; 0.1 mm (0.004 in.) for 1-second integration ¹ |
Wave: 0.4 mm (0.016 in.) for 0.25-second integration; 0.1 mm (0.004 in.) for 1-second integration ¹ |
||||
| Calibration | 0 psia to full scale pressure | 0 psia to full scale pressure | +1 to +32 2 | +1 to +32 2 | 2.6 - 6 plus zero conductivity (air) 2 |
| Repeatability |
0.005% of full scale (1.5 mm for 45 psia range ¹) |
0.03% of full scale (9 mm for 45 psia range ¹) |
|||
| Hysteresis |
0.005% of full scale (1.5 mm for 45 psia range ¹) |
0.03% of full scale (9 mm for 45 psia range ¹) |
|||
|
¹ Stated values in mm are for 45 psia pressure sensor.
Scale for other ranges, multiplying by (actual sensor psia / 45 psia). 2 Measurements outside the specified calibration ranges will be at slightly reduced accuracy due to extrapolation errors. |
|||||
Real-time clock: Quartz TCXO watch-crystal type 32,768 Hz; accuracy ±
2 ppm (5 seconds/month).
Battery-backed for minimum 2-year operation without
main batteries installed.
Memory: 32 Mbyte Flash RAM
Data storage:
Tide with temperature and time: 9 bytes/sample
Tide with temperature, conductivity, and time: 12 bytes/sample
Wave burst: 3 bytes/sample
Power supply:
Internal: standard 12 alkaline D-cell batteries
External (optional): 12 - 20 VDC
Housing: Acetal copolymer plastic to 600 meters
Weight:
Plastic housing with alkaline batteries: 6.8 kg (15 lbs)
in air; 2.3 kg (5 lbs) in water;
Mounting fixture: 3.6 kg (8 lbs) in air; 1.4 kg (3
lbs) in water
ADDITIONAL INFORMATION / LINKS:
Documentation -- manual, photos, technical papers, application notes, etc.
Sales Information -- options, accessories, cables, mount kits, spares, etc.
Software
Links to Other Instruments of Interest
![[HRule Image]](../../images/div.gif){kind=small}
Specifications are subject to change without notice.
