Seasoft V2:
SeatermV2
Software
brochure in pdf format
| Revision History |
Download instructions |
Download from FTP site
| Software FAQs
SeatermV2© is a terminal program
launcher for interfacing with Sea-Bird
instruments developed or redesigned in 2006 and later. The common feature of
this generation of instruments is the ability to output status responses in XML. SeatermV2
can be used with the following instruments:
- SBE
16plus V2 SeaCAT C-T Recorder
(version 2.0 or later firmware)
with RS-232 or RS-485 interface --
Note: The RS-485 version firmware for the 16plus V2 is not available
yet.
- SBE
16plus-IM V2
SeaCAT C-T Recorder (version 2.0 or later firmware) with Inductive Modem
interface
- SBE
19plus V2
(version 2.0 or later firmware) SeaCAT Profiler
- SBE
25plus Sealogger
CTD
- SBE
37-SMP,
37-SM,
37-SIP,
37-SI (all version 3.0
or later firmware) MicroCAT and
37-SMP-ODO,
37-SMP-IDO,
37-SIP-IDO MicroCAT, with RS-232 or RS-485 interface
- SBE
37-IMP and
37-IM (all version
3.0 or later firmware) MicroCAT and
37-IMP-ODO and
37-IMP-IDO MicroCAT, with Inductive Modem interface
- SBE
39plus
Temperature (optional pressure) Recorder
- SBE
54 or PN 90588 Tsunameter
- SBE
56 Temperature Logger
- SBE
63 Optical Dissolved Oxygen
Sensor
-
Glider Payload
CTD (GPCTD)
SeatermV2 launches one of the following
terminal programs, depending on the communication protocol required for the
selected instrument:
- Seaterm232 -- for instruments that
communicate via RS-232
- Seaterm485 -- for instruments that
communicate via RS-485
- SeatermIM -- for instruments that
communicate via Inductive Modem telemetry
- SeatermUSB -- for instruments that
communicate via USB telemetry
The terminal programs can send commands to
the instrument to provide status display, data acquisition setup, data
retrieval, and diagnostic tests. Data uploaded with the terminal programs can be
processed with the post-processing software in Seasoft V2 (SBE Data Processing).
Note: SBE Data processing cannot process data from the SBE 56 Temperature
Logger, or SBE 54 or PN 90588
Tsunameter.
There is no manual for these terminal
programs, but their use is
covered in the instrument manuals and in the Help menus.
SeatermV2 was designed to work with
a PC running Win XP Service pack 2 or later, Windows Vista, or Windows 7.
If you discover reproducible bugs in
SeatermV2, please document the steps taken to achieve them and send a report to
David Goldsmith (dgoldsmith@seabird.com). We welcome any suggestions for new features and
enhancements.
Note:
The Seasoft V2 software suite
also includes the following Windows programs:
-
Deployment Endurance Calculator --
calculator for determining deployment length for moored instruments.
- Seaterm --
terminal program that interfaces with most instruments, providing setup,
data retrieval, and diagnostic tests.
- SeatermAF --
terminal program that interfaces with instruments that include Auto Fire
capability for autonomous operation of an SBE 32 Carousel Water Sampler
(with an SBE 17plus V2 or AFM) or
SBE 55 ECO Water Sampler,
providing setup, data retrieval, and diagnostic tests.
- Seasave
V7 -- data
acquisition program that acquires, converts, and displays real-time or
archived raw data.
-
SBE Data
Processing -- data processing program that converts, edits, processes,
and plots data.
- Plot39 -- plotting
program for data uploaded from the SBE 39plus, 39, or 39-IM.
Also, see
Seasoft for
Waves - Win32 -- for use with SBE 26, 26plus, or 53.