Sea-Bird Electronics            Products            Support            Software            Sales            Service            Search/Sitemap

SBE 32, 32C, and 32SC Carousel Water Sampler
Accessories & Spare Parts
Configuration Details

div.gif (3429 bytes)

Brochure/specifications     Manual

Note: We do not publish prices on the website. Please contact us [seabird@seabird.com or (+1) 425-643-9866] for pricing.

This page lists:

 

Carousel Electronic Release (Pylon) Assemblies:

Part # Description Notes
Hub / Lifting Bail
90247 SBE 32 Hub Assembly (also for use when retrofitting G.O. pylons)
  • To retrofit 12-bottle G.O. pylons: purchase electronic release, hub (90247), & lifting bail (50111).
  • To retrofit 24-bottle G.O. pylons: purchase electronic release & hub (90247); use original G.O. lifting bail.

    

90247T  SBE 32 Hub Assembly, for titanium pylon
50111 Carousel lifting bail assembly, 12-position up to 12 liters & 24-position up to 2.5 liters (also for use when retrofitting G.O. 12-position pylons)
50156 Carousel lifting bail assembly, 12-position larger than 12 liters & 24-position larger than 2.5 liters
Electronics/Release Assembly
Aluminum Housings (6800 m) with Standard (XSG) Connectors

Select appropriate electronics/release, based on following:

 

  • Housing -- aluminum (6800 m) or 3Al2V titanium (7000 m).

 

  • Connector type -- Each housing is available with standard (Impulse XSG-type) or wet-pluggable (MCBH) connectors.

 

  • Latch assembly size / configuration --
    12-, 24-, or 36-position latch assembly is used with full size SBE 32 Carousel (36-position Carousel is custom; consult Sea-Bird).
    Compact or Sub-Compact latch assembly used with SBE 32C or 32SC.

               

  • Interface type --
  • Standard interface supports:
  • Real-time data acquisition & water sampler control ‑
    SBE 9plus CTD with 11plus Deck Unit (not applicable to 32SC).
  • Autonomous operation (no conducting wire required; bottles closed automatically based on pre-programmed pressures or times) ‑
    - SBE 9plus CTD with SBE 17plus V2 SEARAM.
    - SBE 19, 19plus, 19plus V2, or 25 CTD or SBE 50 Pressure Sensor with AFM.
    - No CTD with AFM.
  • Optional interface for real-time operation with SBE 33 Deck Unit supports:
  • Real-time data acquisition & water sampler control ‑
    - SBE 19, 19plus, 19plus V2, or 25 CTD with SBE 33 Deck Unit.
    - No CTD with SBE 33 Deck Unit.
90409 12-position Carousel electronics/release, 6800 m, with Standard connectors & standard interface for SBE 911plus or AFM (Order interface cables separately)
90409.1 12-position Carousel electronics/release, 6800 m, with Standard connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
90410 24-position Carousel electronics/release, 6800 m, with Standard connectors & standard interface for 911plus or AFM (Order interface cables separately)
90410.1 24-position Carousel electronics/release, 6800 m, with Standard connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
90411 Compact or Sub-Compact Carousel electronics/release, 6800 m, with Standard connectors & standard interface for SBE 911plus or AFM (Order interface cables separately)
90411.1 Compact or Sub-Compact Carousel electronics/release, 6800 m, with Standard connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
Titanium (3Al2V) Housings (7000 m) with Standard (XSG) Connectors
90413 12-position Carousel electronics/release, 7000 m, with Standard connectors & standard interface for SBE 911plus or AFM (Order interface cables separately)
90413.1 12-position Carousel electronics/release, 7000 m, with Standard connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
90414 24-position Carousel electronics/release, 7000 m, with Standard connectors & standard interface for 911plus or AFM (Order interface cables separately)
90414.1 24-position Carousel electronics/release, 7000 m, with Standard connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
90415 Compact or Sub-Compact Carousel electronics/release, 7000 m, with Standard connectors & standard interface for SBE 911plus or AFM (Order interface cables separately)
90415.1 Compact or Sub-Compact Carousel electronics/release, 7000 m, with Standard connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
90443 36 position Carousel electronics/release, 7000 m, with Standard connectors & standard interface for SBE 911plus or AFM (Order interface cables separately)
Aluminum Housings (6800 m) with Wet-Pluggable (MCBH) Connectors
90476 12-position Carousel electronics/release, 6800 m, with Wet-pluggable connectors & standard interface for SBE 911plus or AFM (Order interface cables separately)
90476.1 12-position Carousel electronics/release, 6800 m, with Wet-pluggable connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
90477 24-position Carousel electronics/release, 6800 m, with Wet-pluggable connectors & standard interface for 911plus or AFM (Order interface cables separately)
90477.1 24-position Carousel electronics/release, 6800 m, with Wet-pluggable connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
90478 Compact or Sub-Compact Carousel electronics/release, 6800 m, with Wet-pluggable connectors & standard interface for SBE 911plus or AFM (Order interface cables separately)
90478.1 Compact or Sub-Compact Carousel electronics/release, 6800 m, with Wet-pluggable connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
Titanium (3Al2V) Housings (7000 m) with Wet-Pluggable (MCBH) Connectors
90479 12-position Carousel electronics/release, 7000 m, with Wet-pluggable connectors & standard interface for SBE 911plus or AFM (Order interface cables separately)
90479.1 12-position Carousel electronics/release, 7000 m, with Wet-pluggable connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
90480 24-position Carousel electronics/release, 7000 m, with Wet-pluggable connectors & standard interface for 911plus or AFM (Order interface cables separately)
90480.1 24-position Carousel electronics/release, 7000 m, with Wet-pluggable connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)
90481 Compact or Sub-Compact Carousel electronics/release, 7000 m, with Wet-pluggable connectors & standard interface for SBE 911plus or AFM (Order interface cables separately)
90481.1 Compact or Sub-Compact Carousel electronics/release, 7000 m, with Wet-pluggable connectors, standard interface, & optional interface for real-time operation with SBE 33 (Order interface cables separately)

 

Carousel Spares & Accessories:

Part # Description Notes
17198 Interface cable, 9plus to 32, Standard connectors, 2 m (DN 30568) From Carousel to SBE 9plus (when used with 11plus Deck Unit), 17plus V2, or AFM.
  • 17198 for use with systems with standard connectors
  • 171741 for use with systems with wet-pluggable connectors
171741 Interface cable, 9plus to 32, Wet-pluggable connectors, 2 m (DN 32758)
80620 Test cable, 11/33/36 deck unit to 9/32/PDIM, Standard connector, 15 m (DN 31314) From SBE 33 Deck Unit to Carousel.
171220 Carousel interface Y-cable, SBE 35/35RT to SBE 9 & SBE 32, Standard connectors (DN 32208)


Connection diagram applies to SBE 35 as well as SBE 35RT
SBE 35 or 35RT can record temperature with each bottle closing, for comparison to data from CTD’s temperature sensor.
  • 171220 Y-cable connects SBE 35/35RT to:
    - SBE 9plus CTD & Carousel, when Carousel used with 9plus CTD & 11plus Deck Unit for real-time operation.
    -- SBE 17plus V2 & Carousel, when Carousel used with 9plus CTD & 17plus V2 SEARAM for autonomous operation.
    -- AFM & Carousel, when Carousel used with SBE 19, 19plus, 19plus V2, or 25 CTD & AFM for autonomous operation.
  • 171221 cable connects SBE 35/35RT to Carousel, when Carousel used with SBE 19, 19plus, 19plus V2, or 25 CTD & SBE 33 Deck Unit for real-time operation.
171221 Carousel interface cable, SBE 35/35RT to SBE 32, used with SBE 33 Deck unit, Standard connectors, 2.4 m (DN 32209)
17120 2-pin sea cable extension, Standard connectors, 2 m (DN 30588) For use with Carousel with optional serial interface (Carousel used with SBE 19, 19plus, 19plus V2, or 25 CTD & SBE 33 Deck Unit). Female end connects to JB1 on Carousel end cap; male end connects to sea cable. Many users leave extension connected to Carousel, & make connection to sea cable at end of extension (instead of at end cap, which is crowded with a number of connectors & may be difficult to access).
171090 2-pin sea cable extension, Standard connectors, 3 m (DN 30588)
171743 2-pin sea cable extension, Wet-pluggable connectors, 2 m (DN 32763) For use with Carousel with optional serial interface (Carousel used with SBE 19, 19plus, 19plus V2, or 25 CTD & SBE 33 Deck Unit) & optional wet-pluggable connectors. Female end connects to JB1 on Carousel end cap; male end connects to sea cable. Many users leave extension connected to Carousel, & make connection to sea cable at end of extension (instead of at end cap, which is crowded with a number of connectors & may be difficult to access).
171744 2-pin sea cable extension, Wet-pluggable connectors, 3 m (DN 32763)
801435 Data I/O cable, Auto Fire Module (only), Standard connector (RMG-4FS) to DB-9S, 2.4 m (DN 32808)
  • 801435 -- From AFM to computer COM port.
  • 801436 or 801460 -- From AFM or from SBE 55's Electronics Control Module to computer COM port
801436 Data I/O cable, Auto Fire Module or 55 ECM, Standard connector (RMG-4FS) to DB-9S, 20 m, shielded (DN 32808)
801460 Data I/O cable, Auto Fire Module or 55 ECM, Wet-pluggable connector (MCIL-4FS) to DB-9S, 20 m, shielded (DN 32861)
50151 SBE 32 spare O-ring kit See document 67050.
50299 SBE 32 spare titanium latch assembly (replaces 50150) For 12- or 24-bottle Carousel; see document 67157.
Note: For 36-bottle Carousel, order PN 50428 instead.
801319 SBE 32 12 or 24 position magnet Assembly (H900 - replaces 80859) Magnet assembly replacement is difficult to perform; we recommend this work be performed at Sea-Bird.
801329 12-position (Standard) Carousel titanium latch array  
50112 SBE 32 frame (small frame) assembly kit -- includes PN 50211, 50199, 50340 See document 67049 for details. Includes:
  • 50211 - U bolt clamp set for 39-in. & 45-in. diameter extension stand (document 67078)
  • CTD Cage mounting clamps/hardware kit (document 67074)
  • Spare hardware kit, complete, SBE 32 with 1" diameter frame stock (document 67139)
50211 U bolt clamp set (4) for 39-in. & 45-in. diameter extension stand Order 50211 (document 67078) for either of following extension stands:
  • 23675C (39-inch diameter; fits Carousel built for 12-bottles, 1.7- to 12-liter bottle size)
  • 23738C (45-inch diameter; fits Carousel built for 24-bottles, 1.7- to 2.5-liter bottle size)

Order 50212 (drawing 40713) for 23724C (61-inch diameter) extension stand. 50212 includes:

  • 23714 u-bolt (6)
  • 23715 u-bolt flange (6)
  • 30210 nut, 3/8-16 nylon stop (12)
  • 30257 washer, 3/8 flat (12)
  • 30258 washer, 3/8 split ring lock (12)
  • Tape, Teflon
50212 U bolt clamp set (6) for 61-in. diameter extension stand
50297 Deck pad assembly kit for SBE 32 with small frame (1 in. diameter) (document 67117) These are used to protect paint on bottom of Carousel frame.
50296 Deck pad assembly kit for SBE 32 with large frame (1.375 in. diameter) (document 67117)
50199 CTD Cage mounting clamps/hardware kit See document 67074.
50340 Spare hardware kit, complete, SBE 32 with 1" diameter frame stock Order 50340 (document 67139) for following versions of full size SBE 32:
  • 12-place (through 12-liter bottle size), &
  • 24-place (through 2.5-liter bottle size).
50341 Spare hardware kit, complete, SBE 32 with 1.375" diameter frame stock Order 50341 (document 67140) for following versions of full size SBE 32:
  • 12-place (larger than 12-liter bottle size), &
  • 24-place (larger than 2.5-liter bottle size).
50342 Spare hardware kit, complete, SBE 32C (Compact) & SBE 32SC (Sub-Compact) See document 67141.
50133 SBE 32 pylon only spares kit See document 67023.
50111 Carousel lifting bail assembly, 12-position up to 12 liters & 24-position up to 2.5 liters (also for use when retrofitting G.O. 12-position pylons)

12-position lifting bail shown
Lifting bail assembly includes lifting bail as well as all associated hardware (washers, nuts, & insulators):

  • 50111 (document 67033) -- For 12-position full size SBE 32 with bottles up to 12 liters, 24-position full size SBE 32 with bottles up to 2.5 liters, as well as all 32C & 32SC.
  • 50156 -- For 12-position full size SBE 32 with bottles larger than 12 liters & 24-position full size SBE 32 with bottles larger than 2.5 liters.
50156 Carousel lifting bail assembly, 12-position larger than 12 liters & 24-position larger than 2.5 liters
50121 Carousel fixture for mounting SEACAT or AFM vertically in bottle position Mounts SBE 19, 19plus, or 19plus V2 SEACAT, SBE 25 main housing, or AFM vertically in bottle position on SBE 32C or 32SC. See document 67020.
50123 Carousel tool kit - Hex ballpoint wrenches, screwdrivers, ratchet driver, nicopress sleeves, crimp tool, .080 inch monofilament, flush cut pliers See document 67099.
23675C CTD extension stand, 39" diameter x 16" tall, 12 x 1.7-12 liter CTD extension stand attaches to bottom of Carousel frame, for horizontal mounting of CTD in cage beneath Carousel. Extension stand included with standard full size SBE 32.
  • 23675C -- fits full size SBE 32 Carousel built for 12-bottles, 1.7- to 12-liter bottle size.
  • 23738C -- fits full size SBE 32 Carousel built for 24-bottles, 1.7- to 2.5-liter bottle size.
  • 23724C -- fits full size SBE 32 Carousel built for 12-bottles, 20- & 30-liter bottle size & 24-bottles, 5- to 12-liter bottle size.
  • 233785C -- fits SBE 32C Compact Carousel

Order u-bolts separately (50211 for 23675C, 23738C, or 233785C extension stand; 50212 for 23724C extension stand).
23738C CTD extension stand, 45" diameter x 16" tall, 24 x 1.7-2.5 liter
23724C CTD extension stand, 61" diameter x 16" tall, 12 x 20-30 & 24 x 5-12 liter
233785C CTD extension stand for SBE 32C Compact Carousel, 38" diameter x 16" tall
23676C Lower Guard, Standard Carousel, 12 x 1.7 or 5 liter Photos are shown of typical adapter plates, guards (also called guard rings), & side bars. Your Carousel may look a little different (for example, proportions may be different, guard rings may have different number of riser bars).
Example of Carousel size designation: 24 x 5-12 liter is for a Carousel designed for twenty-four 5- to 12-liter bottles.

Side bars connect upper & lower guard rings for SBE 32 (full size) & SBE 32C (compact). For full size SBE 32, there are 2 side bar designs:
  • Side Bar 1 is used at upper guard ring position without riser bar.
  • Side Bar 2 is used at upper guard ring position with riser bar.

SBE 32SC (sub-compact) does not have side bars.
23741C Lower Guard, Standard Carousel, 12 x 2.5 or 8 liter
23683C Lower Guard, Standard Carousel, 12 x 10 liter
23703C Lower Guard, Standard Carousel, 12 x 12 liter
23677C Upper Guard, Standard Carousel, 12 x 1.7-12 liter
23857C Lower Guard, Standard Carousel, 12 x 20 liter or 24 x 8 liter
23719C Lower Guard, Standard Carousel, 24 x 5 liter
23854C Lower Guard, Standard Carousel, 24 x 10 liter
23783C Lower Guard, Standard Carousel, 12 x 30 liter or 24 x 12 liter
23720C Upper Guard, Standard Carousel,  12 x 20 or 30 liter & 24 x 5-12 liter
23737C Lower Guard, Standard Carousel, 24 x 1.7 or 2.5 liter
23736C Upper Guard, Standard Carousel, 24 x 1.7 or 2.5 liter
23792C Lower Guard, Compact Carousel frame
23795C Upper Guard, Compact Carousel frame
231068C Lower Guard, 1.7 liter Sub-Compact Carousel frame
231037C Lower Guard, 2.5 liter Sub-Compact Carousel frame
231038C Upper Guard, Sub-Compact Carousel frame
70071 Adapter Plate Set (upper & lower), Standard Carousel, 12 x 1.7-12 liter
23902C Adapter Plate, Upper, Standard Carousel, 12 x 20-30 liter
23903C Adapter Plate, Lower, Standard Carousel, 12 x 20-30 liter
23729C Adapter Plate, Upper, Standard Carousel, 24 x 1.7-2.5 liter
23730C Adapter Plate, Lower, Standard Carousel, 24 x 1.7-2.5 liter
23716C Adapter Plate, Upper, Standard Carousel, 24 x 5-12 liter
23717C Adapter Plate, Lower, Standard Carousel, 24 x 5-12 liter
23794C Adapter Plate, Upper, Compact Carousel
23793C Adapter Plate, Lower, Compact Carousel
231035C Adapter Plate, Upper, Sub-Compact Carousel
231036C Adapter Plate, Lower, Sub-Compact Carousel
23679C Side Bar 1, Carousel Frame, 12 x 1.7or 5 liter (3 required)
23681C Side Bar 2, Carousel Frame, 12 x 1.7 or 5 liter (3 required)
23739C Side Bar 1, Carousel Frame, 12 x 2.5 or 8 liter (3 required)
23740C Side Bar 2, Carousel Frame, 12 x 2.5 or 8 liter (3 required)
23680C Side Bar 1, Carousel Frame, 12 x 10 liter (3 required)
23682C Side Bar 2, Carousel Frame, 12 x 10 liter (3 required)
23701C Side Bar 1, Carousel Frame, 12 x 12 liter (3 required)
23702C Side Bar 2, Carousel Frame, 12 x 12 liter (3 required)
23855C Side Bar 1, Carousel Frame, 12 x 20 or 24 x 8 liter (3 required)
23856C Side Bar 2, Carousel Frame, 12 x 20 or 24 x 8 liter (3 required)
23781C Side Bar 1, Carousel Frame, 12 x 30 or 24 x 12 liter (3 required)
23782C Side Bar 2, Carousel Frame, 12 x 30 or 24 x 12 liter (3 required)
23742C Side Bar 1, Carousel Frame, 24 x 1.7 liter (3 required)
23743C Side Bar 2, Carousel Frame, 24 x 1.7 liter (3 required)
23725C Side Bar 1, Carousel Frame, 24 x 2.5 liter (3 required)
23726C Side Bar 2, Carousel Frame, 24 x 2.5 liter (3 required)
23721C Side Bar 1, Carousel Frame, 24 x 5 liter (3 required)
23722C Side Bar 2, Carousel Frame, 24 x 5 liter (3 required)
23852C Side Bar 1, Carousel Frame, 24 x 10 liter (3 required)
23853C Side Bar 2, Carousel Frame, 24 x 10 liter (3 required)
23790C Side Bar, Compact Carousel frame (4 required)

 

Bottles and Bottle Spares -- see separate listing

Ordering Carousel -- see separate listings for SBE 32, 32C (compact), and 32SC (sub-compact)

 

Product configuration options listing for all products

Additional cables, mount kits, and spares may be found at: Cables, Mount kits for Sea-Bird sensors, Mount kits for Third Party sensors, Spare parts

div.gif (3436 bytes)

Last modified: 10 Dec 2010

Sea-Bird Home     Phone: (+1) 425-643-9866     Fax: (+1) 425-643-9954     E-mail: seabird@seabird.com